Figure 95: Configure Tokyo Route For Rb Site-To-Site Vpn, Mk; Figure 96: Configure Tokyo Trust Route For Rb Site-To-Site Vpn, Mk - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
610
NOTE: ScreenOS 5.0 devices display both destination-based and source-based routing
tables. ScreenOS 5.1 and later devices display destination-based, source-based, and
source interface-based routing tables.
Configure a route from the untrust interface to the gateway, and then click OK.
16.

Figure 95: Configure Tokyo Route for RB Site-to-Site VPN, MK

Configure route from the trust zone to the tunnel interface, and then click OK.
17.

Figure 96: Configure Tokyo Trust Route for RB Site-to-Site VPN, MK

Your routing table should appear.
Copyright © 2010, Juniper Networks, Inc.