Appendix A Glossary; Network And Security Manager (Nsm) Term Definitions - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

APPENDIX A
Glossary

Network and Security Manager (NSM) Term Definitions

A
Access List
Access-Challenge
Action (Deep
Inspection)
Action (firewall)
Activate Device Wizard
Add Device Wizard
Address Object
Address Shifting
Address Spoofing
Copyright © 2010, Juniper Networks, Inc.
Network and Security Manager (NSM) Term Definitions on page 823
A list of network prefixes that are compared to a given route. If the route matches a network
prefix defined in the access list, the route is either permitted or denied.
An additional condition required for a successful Telnet login by an authentication user via a
RADIUS server.
A DI action is performed by a security device when the permitted traffic matches the attack
object specified in the rule. Deep Inspection actions include drop connection, drop packet, close
client, and so on.
A firewall action is performed by a security device when the device receives traffic that matches
the direction, source, destination, and service. Firewall actions include permit, deny, reject.
The Activate Device wizard guides you through activating a modeled device in the NSM User
Interface.
The Add Device wizard guides you through importing or modeling a new device to the NSM
User Interface.
An address object represents a component of your network, such as a workstation, router,
switch, subnetwork, or any other object that is connected to your network. Use address book
objects to specify the network components you want to protect.
A mechanism for creating a one-to-one mapping between any original address in one range
of addresses and a specific translated address in a different range.
Address Spoofing is a technique for creating packets with a source IP address that is not the
actual interface address. Attackers may use spoofed IP address to perform DDoS attacks
while disguising their true address, or to take advantage of a trusted relationship between two
hosts. To guard against spoofing attacks, configure a security device to check its own route
table. If the IP address is not in the route table, the security device denies the traffic.
823