Using Rapid Deployment (Screenos Only) - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Table of Contents

Advertisement

Network and Security Manager Administration Guide

Using Rapid Deployment (ScreenOS Only)

138
If the configuration status is "platform mismatch," you selected the wrong device
platform when adding the device into NSM. Delete the device from NSM and
add it again using the correct device platform.
If the configuration status shows "device firmware mismatch," you selected the
wrong managed OS version when adding the device into NSM. Delete the device
from NSM and add it again using the correct managed OS version.
In NSM, validate connectivity with the device, and then update the device
4.
configuration:
Check the device configuration status by holding your mouse cursor over the
a.
device in Device Manager, or by checking the configuration status in Device
Monitor. When the device connects, the status displays "Update Needed",
indicating that the device has connected but the management system has not
yet pushed the device configuration.
Update the device configuration by right-clicking the device and selecting Update
b.
Device. The Job Information box displays the job type and status for the update.
When the job status displays successful completion, click Close.
Rapid Deployment (RD) enables deployment of multiple security devices in a large
network environment with minimal user involvement. RD is designed to:
Simplify the deployment of firewall devices in nontechnical environments.
Minimize device staging or technical staff required at the deployment site.
Enable secure and efficient deployment of a large number of firewalls.
Bring new security devices under NSM management for initial configuration.
RD is supported on the following security devices:
ns204
ns208
ns25
ns50
ns5GT-Combined
ns5GT-Dmz-Dual-Untrust
ns5GT-Dual-Untrust
ns5GT-Extended
ns5GT-Home-Work
ns5GT-Trust-Untrust
ns5GTadsl-Extended
ns5GTadsl-Home-Work
ns5GTadsl-Trust-Untrust
ns5GTadslwlan-Extended
ns5GTadslwlan-Home-Work
ns5GTadslwlan-Trust-Untrust
ns5GTwlan-Combined
ns5GTwlan-Dmz-Dual-Untrust
ns5GTwlan-Dual-Untrust
ns5GTwlan-Extended
ns5GTwlan-Home-Work
ns5GTwlan-Trust-Untrust, ns5XP
ns5XT-Combined
ns5XT-Dual-Untrust
ns5XT-Home-Work
ns5XT-Trust-Untrust
nsHSC-Home-Work
nsHSC-Trust-Untrust
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Network and security manager 2010.3

Table of Contents