Table 83: Management System Utilities - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Using Management System Utilities
Copyright © 2010, Juniper Networks, Inc.
Table 82: Process Status (continued)
Name Description
Phys Mem Used Total amount (in megabytes) of physical memory utilized.
CPU Usage Percentage of CPU utilized.
Version Process version.
You can sort server monitor data according to any column header by clicking that column.
Table 83 on page 695 describes management system utilities.

Table 83: Management System Utilities

Name
logcount.sh
setSrsDbParams.sh
tech-support.sh
Description
Provides information on peak/average logging rate, total log
database size, and average log size.
This utility is located on the Device Server at
/usr/netscreen/DevSvr/utils
Configures the GUI Server for connection to the Statistical Report
Server.
This utility is located on the GUI Server at
/usr/netscreen/GuiSvr/utils
Collects and compresses technical support data.
utils
This utility is located in the
and GUI Server.
Chapter 17: Realtime Monitoring
directory on both the Device Server
695