Table of Contents
Advertisement
Creating an Antivirus Profile
Copyright © 2010, Juniper Networks, Inc.
Patterns and Categories and so on in UTM and use them in your various UTM profiles
such as Antivirus or Antispam.
Select
1.
Object Manager
UTM AV Profiles on top and Custom UTM AV Profiles below. You can only view but
not edit the listed predefined profiles. You can create and edit custom profiles.
Select
+
in the
Custom UTM AV Profiles
2.
opens.
Enter a name for the profile.
3.
Select an Engine type: either Kaspersky Lab Engine or Juniper Express Engine.
4.
Properties change according to the chosen engine.
Enter a comment or description.
5.
Select a color from the drop-down list.
6.
Select
Engine Properties
7.
Enable Intelligent Pre-screening.
Set maximum content size. Mouse over the field to see a tool tip with the allowed
values. The allowed range is 20-20000.
Set a time-out period. The allowed range is 1-1800.
Set the decompression limit in the range of 1-4.
Set the HTTP tricking time-out in the range of 0-600.
Set the scan mode: None, All, By-extension.
Select an extension list from the drop-down list or create a new one by clicking
on + beside the field.
Set notification options for: Virus detection, Fallback Block, and Fallback Non-Block.
Set actions for the various situations: Default, Too many requests, Corrupt file,
Out of resources, Engine not ready, Password file, Time out, Maximum content
size, and Decompression Layer. You can select one of these actions for each
situation: None, Block, Log and Permit.
If you select the Juniper Express Engine, you need to also enable the same settings
with the following exceptions, which do not appear in the Juniper Express Engine
tab:
Scan mode
Extension list
>
>
. NSM displays two tables: Predefined
UTM
Anti-VirusProfiles
table. The
. If you select Kaspersky Lab Engine:
Chapter 8: Configuring Objects
New Anti-Virus Profile
window
363
Advertisement
Table of Contents
