Table 81: Server Detail Status; Viewing Additional Server Status Details - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide
692
Table 80: Server Monitor (Machine-wide Info) Data (continued)
Indicator Description
Mem Status based on memory utilization:
OK (memory usage < 99%)
Warning (memory usage > 99%)
Critical (memory usage = 100%)
N/A (when the server is down)
CPU Usage Percentage of CPU used.
Peer Device Server State of the server's peer server (only applicable if you have added a
State secondary server and configured it in an HA Cluster).
Active Server Whether the currently active server is the primary or secondary server in
an HA Cluster.
Last GUI Server Time of day that the GUI Server database was last replicated to its peer
Replication Time server.
You can sort data in the Server Monitor according to any column header by clicking that
column.

Viewing Additional Server Status Details

If you are interested in monitoring additional details about your server's status, you can
view the Server Detail Status window by double-clicking any of the servers that appear
in the Server Monitor. You can also right-click anywhere on the Server Monitor and select
View Details.
Table 81 on page 692 describes information available in the Server Detail Status:

Table 81: Server Detail Status

Name Description
OS Operating system running on server machine.
Type The server's machine processor type.
CPU Idle Percentage of the time the CPU was idle.
CPU User Percentage of CPU utilization that occurred while executing at the user
level.
CPU Kernel Percentage of CPU utilization that occurred while executing at the system
level.
CPU Usage Percentage of CPU utilization.
1 Min Load One minute load average.
Copyright © 2010, Juniper Networks, Inc.