Creating A New Policy Version; Using A Filter To Search For A Policy Version; Editing Comments For An Existing Policy Version - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Copyright © 2010, Juniper Networks, Inc.
Click Close to end your viewing session.
3.

Creating a New Policy Version

This section explains how to use the GUI to create a new policy version.
Some policies or shared objects must exist before you can create a version. See "Setting
NSM to Automatic Policy Versioning" on page 514.
To create a new policy version:
In the NSM GUI, right-click on a policy.
1.
Select View Versions.
2.
Click Create Version.
3.
Optionally, fill in Version Comments and click OK.
4.
The new version appears in the list in the Version History window.
Click Close to save the changes.
5.

Using a Filter to Search for a Policy Version

This section explains how to use a filter to search for a policy version.
To use a filter to search for a version:
In the NSM GUI, right-click on a policy.
1.
In the popup menu, select View Versions.
2.
The Version History window appears.
In the window, select the version and click Filter/Search.
3.
The Version Filter Definition dialog box appears.
In the dialog box, fill in the filter criteria:
4.
Comment Contains — Enter a comment on which to filter the version search.
Created After — Use the up and down arrows to select the date and time.
Created Before — Use the up and down arrows to select the date and time
Press OK.
5.
The Version History now displays existing versions that meet the criteria.
When you are finished, press Close.
6.

Editing Comments for an Existing Policy Version

This section explains how to edit comments for an existing policy version.
To edit comments for an existing version
In the NSM GUI, right-click on a policy.
1.
In the popup menu, select View Versions.
2.
Chapter 9: Configuring Security Policies
515