Table 89: Transitional Graphs; Transitioning To Other Relational Graphs; Setting A Time Duration; Viewing Predefined Reports - Juniper NETWORK AND SECURITY MANAGER 2010.3 - ADMINISTRATION GUIDE REV1 Administration Manual

Network and Security Manager Administration Guide

Table 89: Transitional Graphs

Node Transitions to:
Host Peer IP, Outbound Services, Inbound Service, Server Profiles, Client Profiles,
Attacks
Network Outbound Services, Inbound Service, Server Profiles, Client Profiles, Attacks
Service Outbound IP, Inbound IP
Service range Outbound IP, Inbound IP
Context Outbound IP (if selected context is related to a client), Inbound IP (if
selected context is related to a server, for example, SSH Server Version),
Values
Value Outbound IP, Inbound IP
Attack Source IP, Destination IP, Protocol Ports
726
Center Node—Click on any node that appears in the main graph to center it. You can
also right-click on the node and select Center Node
Expand Node—To view all objects related to a specific node, right-click on any node
and select Expand Node
Collapse Node—If you are not interested in viewing all objects related to a specific
node, you can reduce extraneous data by right-clicking on any node and selecting
Collapse Node
Hide Node—If you are not interested in viewing a specific node, and you want to remove
it from viewing in the graph, right-click on any node and select Hide Node
Use the zoom in and zoom out icons to increase or decrease the size of the nodes on
the graph.
Use the back arrow to view the previous graph. Use the forward arrow to view the next
graph.

Transitioning to Other Relational Graphs

Use the icons that appear in the main graph to quickly access additional information
related to your point of reference. Depending upon the type of icon that you select, you
can transition to another graph. Table 89 on page 726 describes the graphs that you can
transition to:

Setting a Time Duration

Click on the Time Period icon to set a specific time period during which you want to view
data.

Viewing Predefined Reports

Use the Predefined Reports pull-down menu to view a predefined report of that data.
You can access three predefined reports:
Copyright © 2010, Juniper Networks, Inc.