Configuring Instance Import (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual

Configuring Instance Import (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Select
5. Instance Export
a routing instance.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that updated
device configuration to the physical security device for those changes to take effect.
You can update multiple devices at one time. See the Updating Devices section in the
Network and Security Manager Administration Guide for more information.
You can apply one or more policies to routes being imported into a routing instance.
To configure instance import in NSM:
In the navigation tree, select
1.
In the Devices list, double click the device to select it.
2.
Click the
3. Configuration
In the configuration tree, expand
4.
Select
5. Instance Import
that are imported to a routing instance.
Click one:
6.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that updated
device configuration to the physical security device for those changes to take effect.
You can update multiple devices at one time. See the Updating Devices section in the
Network and Security Manager Administration Guide for more information.
and specify the export policies for routes being exported from
Device Manager > Devices
tab.
Routing Options
and specify the import policies to be applied to the routes
Chapter 21: Configuring Routing Options
.
.
371