JunosE 11.3.x BGP and MPLS Configuration Guide
Meaning
Related
Documentation
Monitoring LDP-Related Settings for VPLS
Purpose
Action
638
Reachable (metric 3)
Number of direct next-hops is 1
Direct next-hop ATM2/0.10 (10.10.10.2)
Resolution in IP tunnel-route table of VR
MPLS indirect next-hop index 19
Reachable (metric 3)
Number of direct next-hops is 1
Direct next-hop 0000000c
Reference count is 2
Table 128 on page 638 lists the show ip bgp next-hops command output fields.
Table 128: show ip bgp next-hops Output Fields
Field Name
Indirect next-hop
Resolution
IP indirect next-hop index
MPLS indirect next-hop
index
Reachable
metric
Number of direct next-hops
Direct next-hop
Reference count
show ip bgp next-hops
Display MPLS configuration information for a VPLS instance that uses LDP as the signaling
protocol.
To display information for all VPLS instances configured on the virtual router:
host1:ve1#show ldp vpls
Vpls
Vpls
Remote
Instance
Id
PE
Field Description
BGP next-hop attribute received in the BGP update message
Describes where the indirect next hop is resolved (the IP routing
table, the IP tunnel routing table, or both) and whether this is in a
VR or VRF
Index number of the IP indirect next hop that corresponds to the
BGP indirect next hop and its resolution
Index number of the MPLS indirect next hop that corresponds to
the BGP indirect next hop and its resolution
Indicates whether or not the indirect next hop is reachable. For more
information about the reachability rules that apply for various route
types, see the command description for show ip bgp next-hops
Metric number of the BGP indirect next hop
Number of the equal-cost legs of direct next hops to which this
indirect next hop resolves
MPLS next-hop index that resolves the MPLS indirect next hop
Number of label mappings of BGP routes that use this next hop
In-label
Out-label
Copyright © 2010, Juniper Networks, Inc.