Table 96: Show Ip Bgp Next-Hops Output Fields; Monitoring Ldp-Related Settings For Vpls - Juniper BGP - CONFIGURATION GUIDE V 11.1.X Configuration Manual

JUNOSe 11.1.x BGP and MPLS Configuration Guide
Table 96 on page 636 lists the show ip bgp next-hops command output fields.
Meaning

Table 96: show ip bgp next-hops Output Fields

Related Topics

Monitoring LDP-Related Settings for VPLS

Display MPLS configuration information for a VPLS instance that uses LDP as the
Purpose
signaling protocol.
636
Monitoring LDP-Related Settings for VPLS
Resolution in IP route table of VR
IP indirect next-hop index 2
Reachable (metric 3)
Number of direct next-hops is 1
Direct next-hop ATM2/0.10 (10.10.10.2)
Resolution in IP tunnel-route table of VR
MPLS indirect next-hop index 19
Reachable (metric 3)
Number of direct next-hops is 1
Direct next-hop 0000000c
Reference count is 2
Field Name Field Description
Indirect next-hop BGP next-hop attribute received in the BGP update message
Resolution Describes where the indirect next hop is resolved (the IP routing
table, the IP tunnel routing table, or both) and whether this is in a
VR or VRF
IP indirect next-hop index Index number of the IP indirect next hop that corresponds to the
BGP indirect next hop and its resolution
MPLS indirect next-hop Index number of the MPLS indirect next hop that corresponds to
index the BGP indirect next hop and its resolution
Reachable Indicates whether or not the indirect next hop is reachable. For
more information about the reachability rules that apply for various
route types, see the command description for show ip bgp
next-hops
metric Metric number of the BGP indirect next hop
Number of direct next-hops Number of the equal-cost legs of direct next hops to which this
indirect next hop resolves
Direct next-hop MPLS next-hop index that resolves the MPLS indirect next hop
Reference count Number of label mappings of BGP routes that use this next hop
show ip bgp next-hops