Out Delay (Output Delay) Function; Set The Channel-Independent Delay For Output Channels, And The Global Delay; Mix 1-24 /Mix 25-48/Matrix 1-24/Stereo A, B - Yamaha CS1D Owner's Manual

OUT DELAY (output delay) function

Set the channel-independent delay for output channels, and the global delay

MIX 1-24 /MIX 25-48/MATRIX 1-24/STEREO A, B

[Function]
Set the delay for each output channel.
Console
In the LCD FUNCTION ACCESS
block, press the OUTPUT [DELAY]
switch (press repeatedly until the
screen shown at the right appears)
Display
MENU button OUTPUT DELAY
button the tab for the desired
output channel
[Screen functions]
1 DELAY SCALE
Select the delay time units from the following
choices. The units you select here will be used in the
numerical box located below the delay time setting
knob (3).
The units you select here are linked with the IN
DELAY function DELAY SCALE setting. If you
change the selected units, your selection will be
reflected by the delay time display in other screens.
METER
The delay time will be displayed as a distance (in
meters), calculated by the speed of sound ( 343.59 m/s
in an air temperature of 20°C) the delay time (in
seconds).
OUT DELAY (output delay) function
1
FEET
The delay time will be displayed as a distance (in
feet), calculated by the speed of sound (1127.26 feet/s
in an air temperature of 20°C) the delay time (in
seconds).
SAMPLE (number of samples)
The delay time will be displayed in samples. If you
change the clock rate (displayed immediately below
the button) at which the PM1D system is operating,
the number of samples will change accordingly.
msec (millisecond)
The delay time will be displayed in millisecond units.
When this button is on, the numerical boxes below
and above the delay time setting knob (3) will be
the same value.
99