Stereo Output Block - Yamaha CS1D Owner's Manual

Control surface digital audio mixing system

Hide thumbs Also See for CS1D:

Table of Contents

CS1D Reference Manual (Hardware)

STEREO OUTPUT block

This block mixes the signals that are sent from the input channels and the output channels to the STEREO

bus, and sends them to the output units that are patched to the STEREO A/B channels. If you are using the

PM1D system is used in LCR mode and the CENTER BUS CONTROL button is turned on in the LCR screen

of the PAN/ROUTING function or the MATRIX/ST function, the CENTER bus signal will be output from the

STEREO B channel. In this case, the STEREO B channel will function as a control channel for the CENTER

STEREO OUTPUT

Table of Contents