Yamaha CDR-HD1300 Owner's Manual
  1. Manuals
  2. Brands
  3. Yamaha Manuals
  4. Recording Equipment
  5. CDR-HD1300
  6. Owner's manual

Yamaha CDR-HD1300 Owner's Manual

Hdd/cd recorder
Hide thumbs Also See for CDR-HD1300:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
CDR-HD1300
CDR-HD1300E
REC
FINALIZE
MULTI JOG
PUSH ENTER
TEXT/TIME
MODE
TRACK NO.
COMPLETE
BOOKMARK
DIGITAL REC LEVEL
INPUT
ERASE
OPTICAL
COAXIAL
ANALOG
HDD/CD Recorder
Enregistreur CD/Disque Dur
MENU
CLEAR
ANALOG REC LEVEL
MIN
MAX
OWNER'S MANUAL
MODE D'EMPLOI
UAB

Advertisement

Table of Contents
loading

Related Manuals for Yamaha CDR-HD1300

Summary of Contents for Yamaha CDR-HD1300

  • Page 1 CDR-HD1300 CDR-HD1300E TEXT/TIME TRACK NO. BOOKMARK FINALIZE ERASE Enregistreur CD/Disque Dur MULTI JOG PUSH ENTER MODE MENU COMPLETE CLEAR DIGITAL REC LEVEL INPUT ANALOG REC LEVEL OPTICAL COAXIAL ANALOG OWNER’S MANUAL HDD/CD Recorder MODE D’EMPLOI...

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage”...
  • Page 3 We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion –...
  • Page 4 • Only voltage specified on this unit must be used. Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 5: Before Using

    I Handling of the HDD • The HDD formatted on your CDR-HD1300 cannot be used on other CDR-HD1300s for any reading or writing. If you wish to use the HDD that has been formatted on other CDR-HD1300 on yours, format it again on your CDR-HD1300. See page 85 for formatting.

  • Page 6: About This Manual

    About This Manual I Structure This owner’s manual is composed of following sections. GETTING STARTED This section explains necessary preparations such as remote control and connection. Please read this before using this unit. COPYING AND RECORDING ONTO THE HDD This section describes basic operations; copying from a CD to the HDD and recording from an external component connected to this unit to the HDD.

  • Page 7: Table Of Contents

    Contents GETTING STARTED SUPPLIED ACCESSORIES ... 2 CD/CD-R/CD-RW COMPATIBLE WITH THIS UNIT ... 3 RULES OF DIGITAL RECORDING AND NOTES ON SYSTEM ... 5 Rules of Digital Recording ... 5 Notes on System ... 5 Data on the HDD ... 6 NAMES OF BUTTONS AND CONTROLS ...

  • Page 8: Supplied Accessories

    Make sure the following items are included in your package. • Remote Control OPEN/CLOSE COPY TIMER REC A.M.Q.R. FINALIZE ERASE TRACK NO. TEXT/TIME INPUT WRITE MODE MENU COMPLETE CLEAR ENTER 5 MNO 6 PQR 8 VWX SPACE SYMBOL BOOKMARK REPEAT RANDOM INTRO GROUP SKIP...

  • Page 9: Cd/Cd-R/Cd-Rw Compatible With This Unit

    TOC has been erased. I Erasure or loss of data Yamaha and suppliers accept no liability for the loss of data written on the HDD and CD-R or CD-RW discs, or any problems caused as a result of using this unit.

  • Page 10: Handling Of Discs

    CD/CD-R/CD-RW COMPATIBLE WITH THIS UNIT I Handling of discs Heed the following notes on handling of discs not to create any cause for a recording failure, a loss of the recorded data, or a malfunction of this unit. • This compact disc recorder is designed for use with CDs (including 8cm [3”] discs) bearing the marks only.

  • Page 11: Rules Of Digital Recording And Notes On System

    • When a CD with CD TEXT is copied onto the HDD, CD TEXT will be automatically copied if it is not copy protected. When a CD with CD TEXT is recorded from an external CD player, CD TEXT cannot be copied even if it is not copy protected. To copy CD TEXT, use the built-in CDR drive of this unit.

  • Page 12: Data On The Hdd

    A group of the source programs selected from different discs and recorded as the playlist is called “album”. “Album” corresponds to the “program” function (to play back favorite tracks in the desired order) of a standard CD player. This unit can record 999 albums at maximum onto the HDD. Disc...

  • Page 13: Names Of Buttons And Controls

    NAMES OF BUTTONS AND CONTROLS Front Panel NATURAL SOUND HDD/CD RECORDER POWER PHONES LEVEL POWER COPY Front panel display Disc tray v (Open/Close) TRACK NO./BOOKMARK TEXT/TIME COMPLETE MODE MULTI JOG knob/DIGITAL REC LEVEL control MENU COPY A.M.Q.R. CLEAR PHONES jack PHONES LEVEL control A.M.Q.R.

  • Page 14: Remote Control

    NAMES OF BUTTONS AND CONTROLS Remote Control OPEN/CLOSE COPY TIMER REC A.M.Q.R. FINALIZE TEXT/TIME INPUT MODE COMPLETE CLEAR 5 MNO 8 VWX SPACE SYMBOL BOOKMARK REPEAT RANDOM GROUP SKIP OPEN/CLOSE COPY TIMER REC A.M.Q.R. ERASE FINALIZE TRACK NO. TEXT/TIME WRITE MODE MENU COMPLETE...

  • Page 15: Loading The Batteries In The Remote Control

    I Loading the batteries in the remote control Remove the battery compartment cover on the back of the remote control. Insert 2 batteries (AA, UM-3 or R6 type) according to the polarity markings on the inside of the battery compartment. Close the cover until it snaps into place.

  • Page 16: Display

    NAMES OF BUTTONS AND CONTROLS Display ALBM TOTAL DUPLCT MARK S G A REP HDD mark TOTAL indicator DUPLCT indicator A.M.Q.R. indicator Information display CDR mark REC indicator ALBM indicator MARK indicator Playback mode/play style indicator S indicator G indicator A indicator REP indicator RNDM indicator...

  • Page 17: Display Information

    Display Information The display located in the center of this unit provides the information about the drive (HDD or CDR drive) selected. Each time TEXT/TIME is pressed, the display changes according to the operation. I Display while playing the data on the HDD Group number, track number and elapsed time of the track being played –30 –10...

  • Page 18: Rear Panel

    • The ANALOG LINE IN (REC)/LINE OUT (PLAY) jacks on this unit are numbered # and $ respectively. Connect these jacks to the jacks with the same numbers when connecting this unit to a Yamaha amplifier or receiver. • To connect the turntable directly to this unit, first connect it to the phono equalizer and then connect to the ANALOG LINE IN (REC) jacks on this unit.

  • Page 19: Connecting The Power Cable

    *This terminal is for connection of the personal computer. Information about the connection software is to be announced on the YAMAHA website (see page 93). **For U.S.A. model, one coaxial cable with ferrite core is included. Be sure to connect to the DIGITAL OUT (COAXIAL) jack with this cable, directing the side with ferrite core to this unit.

  • Page 20: Copying From A Cd Onto The Hdd

    A.M.Q.R. Turn on the power of this unit by pressing POWER on the front panel. The message “WELCOME TO YAMAHA HDD/CD SYS- TEM” appears on the display. After the message is displayed, this unit is ready for operation. Press v (OPEN/CLOSE on the remote control) to open the disc tray.
  • Page 21 Press COPY once. The following message appears on the display, and this unit enters the copy standby mode. Copying has not been started yet at this stage. –30 –10 ALL SYNC –30 –10 ALL SYNC Start copying. Press w/d (w on the remote control) to start copying. –30 –10 ALL SYNC The copying conditions (initial settings) are as follows:...

  • Page 22: Copying Favorite Tracks On The Cd

    COPYING FROM A CD ONTO THE HDD Copying Favorite Tracks on the CD You can copy your favorite tracks on a CD onto the HDD. NATURAL SOUND HDD/CD RECORDER POWER COPY PHONES LEVEL A.M.Q.R. Load the CD to copy from on the disc tray. Press v (OPEN/CLOSE on the remote control) to open the disc tray, and place a CD with its label side facing up.

  • Page 23: Advanced Operations

    Advanced Operations I Making an additional copying onto an already recorded disc COPY A.M.Q.R. 5 MNO 6 PQR 8 VWX SPACE SYMBOL BOOKMARK REPEAT RANDOM INTRO GROUP SKIP q GROUP SKIP When the copying onto the HDD, you can select the disc on the HDD to make copy on.
  • Page 24 COPYING FROM A CD ONTO THE HDD Press the MULTI JOG knob (ENTER on the remote control) to confirm the copying mode selected. If “All Synchro” is confirmed, this unit returns to the copy standby mode. If “Multi Synchro” is confirmed, the following message appears on the display.

  • Page 25: Copy Speed

    I Copy Method Setting of the copying method. Copying may fail if the setting for “Copy Method” is not correctly made. –30 –10 ALL SYNC Initial setting: Digital Copy Digital Copy This method always makes digital copies. Copying is not possible if the tracks are copy protected by the SCMS standard (see page 5).

  • Page 26: Recording From An External Component Onto The Hdd

    A.M.Q.R. Turn on the power of this unit by pressing POWER on the front panel. The message “WELCOME TO YAMAHA HDD/CD SYS- TEM” appears on the display. After the message is displayed, this unit is ready for operation. Press HDD to select the HDD.

  • Page 27: Recording From The Analog Components

    Recording from the Analog Components You can make recordings from the component such as a cassette deck and a turntable connected to this unit. Note • Recording onto the HDD is made in the unit called “disc”. The maximum length of one disc on the HDD is 99 minutes 59 seconds. If the recording has been made exceeding the maximum length, the recording will be made continuously to the next available disc.

  • Page 28: Recording Using An External Timer

    See next page for the setting procedure. Time to be set on the external timer (2 minutes + recording time + 3 minutes or longer) Recording time to be set on the CDR-HD1300 (Recording time + 2 minutes) Recording time...
  • Page 29 I Setting for a timer recording NATURAL SOUND HDD/CD RECORDER POWER COPY PHONES LEVEL A.M.Q.R. Turn on the power of this unit by pressing POWER on the front panel. Press HDD to select the HDD. Notes • A timer recording cannot be made when recording onto a CD-R or CD-RW disc.

  • Page 30: Adjusting The Recording Level

    RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD Adjusting the Recording Level There is an adjusting procedure for each input source to be recorded as explained below. Choose the one for your input source and follow the steps. MULTI JOG COPY A.M.Q.R.

  • Page 31: Advanced Operations

    Advanced Operations I Making an additional recording onto an already recorded disc COPY FINALIZE A.M.Q.R. 5 MNO 6 PQR 8 VWX SPACE SYMBOL BOOKMARK REPEAT RANDOM INTRO GROUP SKIP q GROUP SKIP When recording onto the HDD, you can select the disc on the HDD for your recording.
  • Page 32 RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD Press the MULTI JOG knob (ENTER on the remote control) to confirm the recording mode selected. If “Manual”, “Track Synchro” or “All Synchro” is confirmed, this unit returns the recording pause mode. If “Multi Synchro”...
  • Page 33 I Setting a condition for synchronized re- cording MULTI JOG COPY A.M.Q.R. OPEN/CLOSE COPY TIMER REC A.M.Q.R. FINALIZE ERASE TRACK NO. TEXT/TIME INPUT WRITE MODE MENU COMPLETE +, – CLEAR ENTER Press MENU while this unit is in the stop mode. Menu item selection appears on the display.

  • Page 34: Manual Track Marking

    RECORDING FROM AN EXTERNAL COMPONENT ONTO THE HDD I Manual track marking TRACK NO./BOOKMARK COPY A.M.Q.R. This unit can automatically place track markers. However you can also manually place track markers during your recording. (Manual track marking) Press TRACK NO./BOOKMARK (TRACK NO. WRITE on the remote control) during your recording.

  • Page 35: Editing Menu Items

    You can make various editing operations on the albums, tracks and discs on the HDD. The editing menu is listed below. Menu item Album New To create a new album Edit Stored To edit an already created album Album Copy To copy other group as an album Album Rename To change the album number...

  • Page 36: Album Editing

    You can select the desired tracks from among the ones recorded on the HDD and store them as an album in this unit’s memory. You can also edit the album afterwards. Album Editing Operation NATURAL SOUND HDD/CD RECORDER POWER COPY PHONES LEVEL A.M.Q.R.

  • Page 37: Album New

    Album New You can create a new album by selecting the desired tracks from among the ones recorded on the HDD. Select and confirm “Album New” in step 4 of “Editing during the stop mode” on page 30. The following message appears on the display. Source disc Source track D s c 0 0 1 1 ≥...

  • Page 38: Album Copy

    ALBUM EDITING Select the track to be added by rotating the MULTI JOG knob (pressing +/– on the remote control). Press the MULTI JOG knob (ENTER on the remote control) to confirm the track to be added. When continuing to add tracks to the album, repeat steps 4—8. Press COMPLETE.

  • Page 39: Album Rename

    Album Rename You can move the album and assign a new number. Select and confirm “Album Rename” in step 4 of “Editing during the stop mode” on page 30. The following message appears on the display. –30 –10 Album to be moved The number of the album to be moved flashes.

  • Page 40: Album Pack

    ALBUM EDITING Album Pack You can re-organize the album numbers by eliminating unused album numbers that have been created by changing album numbers or deleting albums. Select and confirm “Album Pack” in step 4 of “Editing during the stop mode” on page 30. The following message appears on the display.

  • Page 41: Track Shuffle

    I Entering the title characters by using the MULTI JOG knob Rotate the MULTI JOG knob clockwise. When the MULTI JOG knob is rotated clockwise, characters appear in the order of alphabetical capital letters, alphabetical lower case letters, numbers, and symbols. Select the character you wish to use for the title.

  • Page 42: Track Level

    ALBUM EDITING Rotate the MULTI JOG knob (press +/– on the remote control) to select the new track number. Press the MULTI JOG knob (ENTER on the remote control) to confirm the new track number. Press CLEAR to cancel the confirmed selection. Press COMPLETE.
  • Page 43 Rotate the MULTI JOG knob (press +/– on the remote control) to adjust the level. Adjustment is possible in the –12dB to +12dB range by 0.4dB steps. You can compare the level with the previous or next tracks’ level by pressing t/e or r/y (t or y on the remote control).

  • Page 44: Tr. Interval

    ALBUM EDITING Tr. Interval You can adjust each track interval in an album. I Editing during the stop mode Select and confirm “Tr. Interval” in step 4 of “Editing during the stop mode” on page 30. The following message appears on the display. Track to adjust its interval between the previous track Album to adjust its track interval The number of the album to adjust its tracks’...

  • Page 45: Track Editing

    You can do various editing operations on the tracks that have been recorded on the HDD. Track Editing Operation NATURAL SOUND HDD/CD RECORDER POWER COPY PHONES LEVEL A.M.Q.R. I Editing during the stop mode Press HDD to select the HDD. Press MENU.

  • Page 46: Track Rename

    TRACK EDITING Track Rename You can move a track and assign a new number. I Editing during the stop mode Select and confirm “Track Rename” in step 5 of “Editing during the stop mode” on page 39. The following message appears on the display. Disc that contains the track to be moved The disc number that contains the track to be moved flashes.

  • Page 47: Track Adjust

    Track Adjust You can change the beginning of the track to either earlier or later. I Editing during the stop mode Select and confirm “Track Adjust” in step 5 of “Editing during the stop mode” on page 39. The following message appears on the display. Disc that contains the track to be adjusted A d j u s t 0 0 1 2 ? –30 –10...

  • Page 48: Track Erase

    TRACK EDITING Press COMPLETE. The new track beginning point is set. Playback resumes from the beginning of the adjusted track. Before “Track Adjust” is performed After “Track Adjust” has been performed (The beginning of track 2 is adjusted earlier.) Notes •...

  • Page 49: Part Erase

    Part Erase You can erase part of a selected track. I Editing during the stop mode Select and confirm “Part Erase” in step 5 of the “Editing during the stop mode” on page 39. The following message appears on the display. Disc that contains the track to be partially erased –30 –10 Track to be partially erased...
  • Page 50 TRACK EDITING I Editing during playback Select and confirm “Part Erase” in step 2 of “Editing during playback” on page 39. The track being played is confirmed to be partially erased. The passage between the point that is 5 seconds before the beginning point of the partial erase and the beginning point (the timing you press MENU) is repeatedly played.

  • Page 51: Track Combine

    Track Combine You can combine a series of tracks into one. I Editing during the stop mode Select and confirm “Track Combine” in step 5 of “Editing during the stop mode” on page 39. The following message appears on the display. Disc that contains the first track to be combined –30 –10 Track to be the first in the combination...

  • Page 52: Track Divide

    TRACK EDITING Track Divide You can divide a track into two at the selected point. I Editing during the stop mode Select and confirm “Track Divide” in step 5 of “Editing during the stop mode” on page 39. The following message appears on the display. Disc that contains the track to be divided The disc number that contains the track to be divided flashes.

  • Page 53: Track Pack

    Press COMPLETE. The track being played is divided into two at the set dividing point. Playback resumes from the beginning of the second track of the two divided tracks. Cautions • The minimum length of a track is 4 seconds. It is not possible to create a track that is shorter than 4 seconds by dividing a track.

  • Page 54: Add Fade In

    TRACK EDITING Add Fade In You can add fade-in at the beginning of a track. The beginning of the track is played with gradually rising level when fade-in has been added. I Editing during the stop mode Select and confirm “Add Fade In” in step 5 of “Editing during the stop mode”...

  • Page 55: Add Fade Out

    Press COMPLETE. The fade-in is added to the beginning of the track being played for the selected length. Playback resumes from the beginning of the track the fade-in has been added to. Notes • Fade-in cannot be added to a track that is shorter than 21 seconds. •...

  • Page 56: Track Title

    TRACK EDITING I Editing during playback Select and confirm “Add Fade Out” in step 2 of “Editing during playback” on page 39. The ending of the track for 8 seconds is repeatedly played with a 3-second (initial setting) fade-out. The following message appears on the display. Fade-out length Playing time of the track Rotate MULTI JOG knob (+/–...
  • Page 57 Enter the title characters by using the MULTI JOG knob or the alphabetical/numeric buttons on the remote control. See description on right for entering procedure. Press COMPLETE when all the characters have been entered. The title is assigned to the selected track. This unit returns to the editing menu item selection.

  • Page 58: Disc Editing

    You can do various editing operations on the discs that have been recorded on the HDD. Disc Editing Operation NATURAL SOUND HDD/CD RECORDER POWER COPY PHONES LEVEL A.M.Q.R. I Editing during the stop mode Press HDD to select the HDD to edit. Press MENU.

  • Page 59: Disc Rename

    Disc Rename You can move a disc and assign a new number. I Editing during the stop mode Select and confirm “Disc Rename” in step 5 of “Editing during the stop mode” on page 52. The following message appears on the display. –30 –10 Disc to be moved The disc number to be moved flashes.

  • Page 60: Disc Combine

    DISC EDITING Disc Erase You can erase a selected disc. I Editing during the stop mode Select and confirm “Disc Erase” in step 5 of “Editing during the stop mode” on page 52. The following message appears on the display. The number of the disc to be erased flashes.

  • Page 61: Disc Divide

    I Editing during playback Select and confirm “Disc Combine” in step 2 of “Editing during playback” on page 52. The disc being played is confirmed to be the first disc in the combination. The number of the disc being played and the number of the disc to be the last in the combination appear on the display.

  • Page 62: Disc Pack

    DISC EDITING I Editing during playback Select and confirm “Disc Divide” in step 2 of “Editing during playback” on page 52. The disc being played is confirmed to be divided. “Div.from” and the dividing point (the number of the track to be the first after dividing) appear on the display.

  • Page 63: Disc Title

    Disc Title You can assign a title to a recorded disc. I Editing during the stop mode Select and confirm “Disc Title” in step 5 of “Editing during the stop mode” on page 52. The following message appears on the display. –30 –10 Disc to assign a title to The number of the disc to assign a title to flashes.

  • Page 64: Undo Function

    You can cancel an operation and the result of a previous editing step on this unit (Undo function). MULTI JOG COPY A.M.Q.R. Press MENU to display the menu item selection while this unit is in the stop mode. Select “Undo” by rotating the MULTI JOG knob (pressing +/–...

  • Page 65: Bookmark

    While playing a track, you can place a bookmark temporarily on the track. Bookmark is convenient for immediate playback of the desired track and for creating a new album since the tracks with bookmarks are stored as a playlist. TRACK NO./BOOKMARK COPY FINALIZE A.M.Q.R.

  • Page 66: Copying From The Hdd Onto A Cd-R Or Cd-Rw Disc

    COPYING FROM THE HDD ONTO A CD-R OR CD-RW DISC Copying a Whole Group (Disc, Album or Bookmark) You can copy all tracks in a whole group of discs, albums or a bookmark. NATURAL SOUND HDD/CD RECORDER POWER COPY PHONES LEVEL A.M.Q.R.
  • Page 67 Press COPY twice. The following message appears on the display, and this unit enters in the copy standby mode. Copying has not been started yet at this stage. –30 –10 ALL SYNC ANLG –30 –10 ALL SYNC ANLG Select the group on the HDD to be copied. Rotate the MULTI JOG knob (press +/–...

  • Page 68: Copying Favorite Tracks On The Hdd

    COPYING FROM THE HDD ONTO A CD-R OR CD-RW DISC Copying Favorite Tracks on the HDD NATURAL SOUND HDD/CD RECORDER POWER COPY PHONES LEVEL A.M.Q.R. Load a new CD-R or CD-RW disc, or a CD-R or CD- RW disc without finalization. Press v (OPEN/CLOSE on the remote control) to open the disc tray, and place a CD-R or CD-RW disc with its recordable side facing down.

  • Page 69: High Quality Copying

    High Quality Copying You can make your own CD with high quality sound with the Audio Master Quality Recording mode. Cautions • Audio Master Quality Recording mode can be used only for copying from the HDD on a new CD-R disc. •...

  • Page 70: Advanced Operations

    COPYING FROM THE HDD ONTO A CD-R OR CD-RW DISC Advanced Operations I Setting the copying mode This unit provides various copying modes. Choose the one that suits your needs. Initial setting: All Synchro COPY A.M.Q.R. Press MODE while this unit is in the copy standby mode.
  • Page 71 I Copying menu setting You can make detailed settings on the menu for your copying. Follow the steps described below for menu setting. MULTI JOG COPY A.M.Q.R. OPEN/CLOSE COPY TIMER REC A.M.Q.R. FINALIZE ERASE TRACK NO. TEXT/TIME INPUT WRITE MODE MENU COMPLETE +, –...
  • Page 72 COPYING FROM THE HDD ONTO A CD-R OR CD-RW DISC I Copy Level Setting of the sound level for copying. Sound level adjustment is not normally necessary. However it is possible to adjust the copying sound level to suit you needs. ALL SYNC ANLG The following message appears on the display when “Copy Level”...

  • Page 73: Recording From An External Component Onto A Cd-R Or Cd-Rw Disc

    You can record from an external component directly to a CD-R or CD-RW disc. Following is an explanation for digital recording from an external CD player connected to the DIGITAL IN (OPTICAL) or DIGITAL IN (COAXIAL) jacks on this unit.
  • Page 74 Start playback on an external CD player. Press w/d (d on the remote control) to stop recording temporarily. “Wait” flashes on the display. The CDR mark starts flashing in a few seconds and the track number is advanced to the next.

  • Page 75: Advanced Operations

    Advanced Operations I Setting the recording mode This unit provides various recording modes. Choose the one that suits your needs. Initial setting: Track Synchro COPY A.M.Q.R. OPEN/CLOSE COPY TIMER REC A.M.Q.R. FINALIZE ERASE TRACK NO. TEXT/TIME INPUT WRITE MODE MENU MODE COMPLETE +, –...

  • Page 76: Finalization

    Finalization is the process that concludes recording, and allows a CD-R disc to be played on a standard CD player or a CD-RW disc to be played on a CD-RW-compatible player. COPY A.M.Q.R. Load a recorded CD-R or CD-RW disc without finalization.

  • Page 77: Erasing A Cd-Rw Disc

    You can erase the data recorded on a CD-RW disc. New recordings can be made in the space created by erasing. The following 4 types of erasing are possible with this unit. I Last Track Erase This operation erases the last track on a disc. “Last Track Erase” cannot be performed if a CD-RW disc has been finalized, or only one track has been recorded on the disc.

  • Page 78: Duplication Of A Cd

    You can quickly duplicate a commercially available CD using this unit. Caution • Duplication may not correctly made on a CD-R or CD-RW disc that does not support high speed writing. In this case, copy a CD onto the HDD first, then perform “Digital Move” on a CD-R or CD-RW disc at 2x or 1x speed. NATURAL SOUND HDD/CD RECORDER POWER COPY...
  • Page 79 Start copying from the CD onto the HDD. Press w/d (w on the remote control) to start copying. The copying conditions are as follows: • Copy Method: “Digital Copy” • Copy Level: • Copy Speed: “Best Effort” Cautions • If copying is canceled by a being pressed, even the data that has been copied before cancellation does not remain on the HDD.

  • Page 80: High Quality Duplication

    DUPLICATION OF A CD High Quality Duplication You can duplicate a CD with high quality sound with the Audio Master Quality Recording mode. Cautions • Audio Master Quality Recording mode can be used only for duplicating on a new CD-R disc. •...
  • Page 81 Cautions • When total time of the CD to be duplicated exceeds recordable time on a CD-R disc (63 minutes for a 74-minute CD-R disc and 68 minutes for an 79-minute CD-R disc), the following message appears on the display. In this case, Audio Master Quality Recording mode cannot be used.

  • Page 82: Playback

    This unit can play back tracks recorded on the 2 types of recording media; HDD and CD. Press HDD to play tracks recorded on the HDD, and press CDR to play tracks recorded on a CD (including a CD-R and a CD-RW disc). Playing a CD COPY A.M.Q.R.

  • Page 83: Finding The Desired Passage (Search)

    COPY FINALIZE A.M.Q.R. t/e r/y Finding the Desired Passage (Search) I To go forward rapidly Press and hold r/y (r on the remote control) during playback. When the button is released, normal playback resumes. I To go backward rapidly Press and hold t/e (e on the remote control) during playback.

  • Page 84: Finding The Desired Track (Track Skip)

    PLAYBACK COPY A.M.Q.R. t/e r/y Finding the Desired Track (Track Skip) I To select the desired track number with the MULTI JOG knob Press the MULTI JOG knob to turn on the TRACK indicator on the display. –30 –10 –6 –2 Rotate the MULTI JOG knob clockwise to advance to the next track and the following tracks or counterclockwise to return to the...

  • Page 85: Selecting Tracks Using On-Screen-Display (Osd)

    Selecting Tracks Using On-Screen- Display (OSD) You can display a list of groups and tracks to be played by connecting this unit to a monitor. If you display the list on a screen, it is much easier to see than on the display. Note •...

  • Page 86: Various Playback

    This unit provides various playback methods according to the setting. The following steps describe the setting procedure for each setting. Notes • The setting of play style, random play, repeat play, and intro play can be set during the playback. •...

  • Page 87: Single Repeat Play

    • When random play is set, all tracks that belong to the selected group category are played in a random sequence. • When full repeat play is set, all tracks that belong to the selected group category are repeatedly played. •...

  • Page 88: Full Repeat Play

    VARIOUS PLAYBACK Full Repeat Play You can repeatedly listen to all tracks recorded in a group (or a CD) or group category. I To set full repeat play Press HDD or CDR to select the drive to be used. Press MODE to start the playback mode setting. Rotate the MULTI JOG knob (press +/–...

  • Page 89: Intro Play

    Intro Play You can listen to the beginnings of the tracks for a set amount of time one after another. I To set intro play Press HDD or CDR to select the drive to be used. Press MODE to start the playback mode setting. Rotate the MULTI JOG knob (press +/–...

  • Page 90: Dac (Digital/Analog Converter) Mode

    DAC (DIGITAL/ANALOG CONVERTER) MODE This unit has a DAC mode function. You can switch the input signals, as an input selector, to output from both the analog and digital jacks to the amplifier connected to this unit. COPY A.M.Q.R. Press MENU while this unit is in the stop mode. The display changes for the menu item selection.

  • Page 91: Hdd Utility

    I To check the HDD utility (HDD Info.) You can check the HDD utility (capacity, usage, and available space) of this unit. Press MENU while this unit is in the stop mode. The display changes for the menu item selection. Select “HDD Utility”...

  • Page 92: System Utility

    I To check the firmware version (Firm. Version) Software that is called “firmware” is built into this unit. This firmware controls the operation. The following steps describe the firmware version check procedures. Press MENU while this unit is in the stop mode. The display changes for the menu item selection.
  • Page 93 I To change the display brightness (Dimmer Setup) You can change the brightness of the display. Press MENU while this unit is in the stop mode. The display changes for the menu item selection. Select “Sys. Utility” by rotating the MULTI JOG knob (pressing +/–...
  • Page 94 SYSTEM UTILITY I To set auto play (Auto Play) You can set the auto play function which automatically starts playback when the power of this unit is turned on. Press MENU while this unit is in the stop mode. The display changes for the menu item selection. Select “Sys.

  • Page 95: On-Screen Display (Osd)

    You can display the list of groups or tracks to be played, copying/recording settings and the list of the setting items on the monitor by connecting the monitor to this unit. I List of groups or tracks The numbers and titles of groups, or the numbers and titles of tracks are displayed.

  • Page 96: Display Messages

    Audio Master Quality Recording mode. Can’t use HDD The loaded HDD has been formatted by other CDR-HD1300s. Reformat by the CDR-HD1300 on which you plan to use that HDD, following the instruction on page 85. Change Discs!
  • Page 97 DISPLAY MESSAGES Reading This unit reads the format of the CD, CD-R, or CD-RW disc loaded on the disc tray. Approximately 15 seconds may be required to complete this automatic adjustment. However, this time length may change according to the type of the CD, CD-R, or CD-RW disc that has been loaded.

  • Page 98: Troubleshooting

    If this unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If they cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for assistance. SYMPTOM This unit does not turn on The power cable is not completely connected.

  • Page 99: About Product Informations

    The HDD is not set to “slave” properly. the display. ABOUT PRODUCT INFORMATIONS YAMAHA Audio and Video website contain the latest product information, etc. Refer to the website to check the latest information. YAMAHA Audio and Video website: http://www.yamaha.co.jp/english/product/av/ CAUSE Turn off the power of this unit and then turn on again after about one minute.

  • Page 100: Specifications

    I Audio Performance Frequency response ... 5 to 20,000 Hz, ±0.5 dB S/N ratio (EIAJ) Playback ... 105 dB Recording ... 92 dB Total harmonic distortion (1 kHz) Playback ... 0.004 % Recording ... 0.006 % Dynamic range Playback ... 99 dB Recording ...
  • Page 101 CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ATTENTION L’emploi de commandes, de réglages ou un choix de procédures différents des spécifications de cette brochure peut entraîner une exposition à d’éventuelles radiations pouvant être dangereses.
  • Page 102 YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Malaysia V956620-1 YAMAHA MUSIC AUSTRALIA PTY, LTD.
  • Page 103 CDR-HD1300 CDR-HD1300E HDD Installation Manual Manuel d’installation du disque dur Festplattenspeicher-Installationshandbuch Hårddiskinstallationsanvisningar Manuale d’installazione dell’HDD Manual de instalación del disco duro Installatiehandleiding voor de harde schijf...
  • Page 104 There are some models that do not have a built-in hard disk drive (HDD) depending on the sales location. Please purchase a commercially available HDD for internal use and install it on this unit correctly, referring to the instruction below. I Required specifications of the HDD Interface ...
  • Page 105 Note • Formatting is not necessary for the HDD that has been formatted on CDR-HD1300 you use. However, you need to format the HDD that has been formatted on other CDR-HD1300s following the steps on page 83 of the owner’s manual.
  • Page 106 Printed in Malaysia WA08420...

This manual is also suitable for:

Cdr-hd1300e

Table of Contents