Analog Input Characteristics; Analog Output Characteristics - Yamaha CS1D Owner's Manual

METER BRIDGE BLOCK
8 digits 7 segment LED
3 digits 7 segment LED
16 digits 5 x 7 dot LED
LEDs
DISPLAY BLOCK
DISPLAY
Analog Rotary Potentiometer

Analog Input Characteristics

Input Terminals GAIN
–44dB
TALKBACK IN
*1
1, 2
+10dB
2-TRACK IN
—
*3
ANALOG 1, 2
*1. AD converters are 24bit linear, 128 times oversampling.
+48V DC (phantom power) is individually supplied to each TALKBACK connectors via 6.8kΩ resistors.
*2. Balanced (1= GND, 2= HOT, 3= COLD)
*3. AD converters are 24bit linear +4bit floating, 128 times oversampling.
• 0dB= 0.775Vrms, 0dBV= 1Vrms.

Analog Output Characteristics

Actual Load
Input Terminals
Impedance
MONITOR OUT A, B 150Ω
CUE OUT 150Ω
PHONES A1, B1 15Ω
PHONES A2, B2 15Ω
*1. Balanced (1= GND, 2= HOT, 3= COLD)
*2. Unbalanced (Tip= LEFT, Ring= RIGHT, Sleeve= GND)
• 0dB= 0.775Vrms, 0dBV= 1Vrms.
• DA converters are 24bit linear, 128 times oversampling.
*3. The position of the level control is 10dB lowered from MAX.
TIME CODE
SCENE MEMORY NUMBER
SCENE MEMORY NAME
SCENE MEMORY CURRENT, SCENE MEMORY PREVIEW
MIX OUT 1-24 meter 21 elements
MIX OUT 25-48 / MATRIX OUT 1-24 meter 21 elements
STEREO A L, R meter 21 elements
STEREO B L, R meter 21 elements
CUE L, R meter 21 elements
800 x 600 dots COLOR GRAPHIC LCD w/ backlight
BRIGHTNESS
Actual Load For Use With
Impedance Nominal
50-600Ω Mics
3kΩ
& 600Ω Lines
10kΩ 600Ω Lines
For Use With
Nominal
600Ω Lines
600Ω Lines
8Ω Phones
40Ω Phones
8Ω Phones
40Ω Phones
Input level
Nominal Max. before clip
–44dB (4.89mV) –30dB (24.5mV)
+10dB (2.45V) +24dB (12.3V)
+10dB (2.45V) +24dB (12.3V)
Output level
Nominal Max. before clip
+10dB (2.45V) +24dB (12.3V)
+10dB (2.45V) +24dB (12.3V)
*3
75mW 150mW
*3
65mW 150mW
*3
75mW 150mW
*3
65mW 150mW
Analog Input Characteristics
Connector
XLR-3-31 type
*2
(Balanced)
XLR-3-31 type
(Balanced)
Connector
XLR-3-32 type
*1
(Balanced)
XLR-3-32 type
*1
(Balanced)
Stereo Phone Jack
*2
(Unbalanced)
Stereo Phone Jack
*2
(Unbalanced)
65