Yamaha CS1D Owner's Manual page 423

Output functions
2 A/B LINK
For adjacent channels in the screen, this button links
the selection of input jack A or B on an AD card with
head amp. If this button is on, switching the A/B but-
ton (4) of one channel will forcibly turn on the
same button for the other channel.
If the AD card with head amp is patched to two or
more channels, switching A/B on a channel for which
A/B LINK is on will cause A/B to be switched in the
same way for all channels to which the card is
patched.
In addition, if there are any channels that are linked
to these patch destination channels, they will be
switched in the same way.
3 Level meter
This is a peak level meter showing the input level.
4 A/B
This button switches between input jacks A/B of the
AD card with head amp.
5 +48 V
For each channel, this button switches the phantom
power on/off for the AD card with head amp.
The +48V switch on the front panel of the AI8
input unit is the master phantom power switch for
the entire unit. If this switch is off, phantom power
cannot be used on that unit (regardless of the set-
ting of the +48V button in the display).
6 ø (phase)
This button switches the input signal between nor-
mal and inverted phase.
7 GAIN
This knob adjusts the input sensitivity of the head
amp. It covers a range of +10dB — –68 dB, and the
current value is displayed in the numerical box
immediately below the knob.
8 Unit type/ID number/channel number
This displays the input unit type and ID number, slot
number, and input jack channel number.
9 Pair setting
This displays the channel number and the pairing
status. You can click the heart symbol to select/defeat
pairing.
0 Digital I/O card
If a digital I/O card is installed in the digital input/
output unit, the type of digital I/O card will be
shown here.
A DE-EMPHASIS
If a signal with emphasis (emphasis = ON) is input
to the corresponding port of the digital input/output
unit, this area will indicate "DE-EMPHASIS."
88
B UNIT LIBRARY
This button accesses the UNIT LIBRARY window in
which preamp settings for all units can be stored/
recalled ( p.170).
B