Table of Contents
Advertisement
5 INSERT ON/OFF
This button switches insertion on/off. It has the same
function as the INS. button in the INSERT/DIRECT
POINT screen ( p.124).
6 Input channel block diagram
This is a block diagram for the currently selected
input channel. Each button has the following func-
tion.
INSERT button
This button selects the insert I/O point. The wiring
in the block diagram will change depending on the
location of the INSERT button that you turn on.
DIRECT button
This button selects the direct out point. The wiring
in the block diagram will change depending on the
location of the DIRECT button that you turn on.
ATT, HPF, EQ, GATE, COMP, DELAY buttons
These access a window in which you can operate the
corresponding parameters.
Hint
When the ATT, HPF, EQ, GATE, COMP, or DELAY
buttons have been used to access the corresponding
window, you can click the OK button in the screen to
return to the INSERT/DIRECT VIEW screen.
The screen shot shown above is an example of a
monaural input channel that has not been stereo-
paired. If you have selected two stereo-paired input
channels or one side of a stereo input channel, the
block diagram will show two channels.
7 DIRECT OUT
This shows the unit type and number, card number,
and output jack channel number that has been
assigned as the direct output for the currently
selected input channel.
6
IN PATCH functions
5
7
127
Advertisement
Chapters
Table of Contents
