Yamaha CS1D Owner's Manual page 506

4
5
6
4 Library list
This shows a list of the unit data stored in memory.
The highlighted line is currently selected for opera-
tions.
5 STORE/RECALL buttons
These buttons store/recall unit data.
Each button has the following function.
RECALL
Load the currently selected unit data from the library
list into the PM1D system.
STORE
Store the input/output unit settings of the PM1D
system to the number currently selected in the
library list. When you click this button, the LIBRARY
STORE popup window will appear, allowing you to
assign a name to the input unit data.
If EVENT RECALLING is set to ENABLE in the TC
EVENT screen, it is not possible to press the
STORE button.
TITLE EDIT
This edits the title of the unit data currently selected
in the library list.
The TITLE EDIT button is valid only if data has
actually been stored in the number selected in the
library list. If a number with no data is selected, the
button text will be gray, and the button cannot be
used.
APPLY EDIT
Store the edited content of the INPUT UNIT
LIBRARY window back into the same library num-
ber.
Hint
The APPLY EDIT button is valid only if the data of
the number selected in the library list has been
edited. If un-edited data is selected, and if a number
marked "READ ONLY" is selected, the button text
will be gray, and the button cannot be used.
6 EDIT
If you edit the unit data selected in the library list 4 ,
this area will indicate "EDIT."
7 EXIT
This button exits the INPUT UNIT LIBRARY win-
dow and returns to the previous screen.
Even if you recall a unit library, the units or cards
that are actually connected to the input/output jacks
will take priority.
When recalling a library that was saved while a unit
was connected, if no unit is installed for the recall
7
destination input/output jacks (for example even if a
virtual unit is specified), the settings of the recall
source unit will be used, and a virtual unit will be
newly specified.
UNIT LIBRARY
171