Yamaha CS1D Owner's Manual page 274

Control surface digital audio mixing system

Hide thumbs Also See for CS1D:

Table of Contents

Selecting a channel

The channel to be controlled by the SELECTED OUT-

PUT CHANNEL block can be selected in the following

1. Using the [SEL] switch

You can use the following [SEL] switches to directly

select the desired output channel.

The [SEL] switch LED of the currently selected chan-

nel will light.

MIX OUTPUT block MIX [SEL] switch

Selects a MIX channel 1–48.

MIX OUTPUT block

MATRIX OUTPUT block MATRIX [SEL] switch

Selects a MATRIX channel 1–24.

MATRIX OUTPUT block

MATRIX OUTPUT

SELECTED OUTPUT CHANNEL block

STEREO OUTPUT block STEREO [SEL] switch

Selects the L channel or R channel of STEREO A/B.

If you repeatedly press the same STEREO [SEL]

switch, you will cycle between the L and R of that

STEREO OUTPUT block

STEREO OUTPUT

Chapters

Table of Contents