Sending A Signal From An Output Channel To An Output Unit - Yamaha CS1D Owner's Manual

OUTPUT section
Control the output level and on/off
status of the signal sent from the cur-
rently selected channel to the output
unit or STEREO bus/MATRIX bus.

Sending a signal from an output channel to an output unit

Here's how the SELECTED OUTPUT CHANNEL block can be used to send the signal of an output channel from the
output unit that is patched to that channel.
[Procedure]
1. Use the [SEL] switches of the MIX OUTPUT block,
MATRIX OUTPUT block, or STEREO OUTPUT
block to select the output channel that you wish to
control.
Before using the SELECTED OUTPUT CHANNEL
block, you must first select the output channel that
you wish to control (a MIX channel, MATRIX chan-
nel, or L/R of the STEREO A/B channel).
ON
PAIR
EQUALIZER
ON
CHANNEL SELECT
SELECTED OUTPUT CHANNEL
MIX OUTPUT block
[SEL] switch
Chapter 5. Basic operation for output channels
DCA section
Assign the currently selected channel
to the desired DCA group.
DCA
SAFE section
Temporarily exclude the currently
SAFE
selected select from Scene Recall
operations or Mute Group operations.
CHANNEL SELECT section
Select/view the channel that will be
controlled in the SELECTED OUT-
SHIFT
DEC INC
PUT CHANNEL block.
ON
PAIR
MATRIX OUTPUT block
[SEL] switch
75