Amp Simulate; Dyna. Filter; Dyna. Flange - Yamaha CS1D Owner's Manual

• AMP SIMULATE

Parameter
STK-M1, STK-M2, THRASH,
AMP TYPE MIDBST, CMB-PG, CMB-VR,
CMB-DX, CMB-TW, MINI
DST1, DST2, OVD1, OVD2,
DST TYPE
CRUNCH
NOISE GATE 0 - 20
DRIVE 0 - 100
MASTER 0 - 100
CAB 0 - 100 [%]
BASS 0 - 100
MIDDLE 0 - 100
TREBLE 0 - 100
EQ F 100 - 8.0k [Hz]
EQ G –12.0 - +12.0 [dB]
EQ Q 10.0 - 0.10
BALANCE WAT 0 - 100 [%]

• DYNA. FILTER

Parameter
SENSE 0 - 100
FILTER TYPE LPF, HPF, BPF
OFFSET 0 - 100
RESONANCE 0 - 20
LEVEL 0 - 100
DIRECTION UP, DOWN
5.0ms - 42.3s(@fs=48kHz),
DECAY
6.0ms - 46.0s(@fs=44.1kHz)
BALANCE WAT 0 - 100 [%]

• DYNA. FLANGE

Parameter
SENSE 0 - 100
FB.LEVEL –99 - +99 [%]
HI.RATIO 0.1 - 1.0
OFFSET 0 - 100
DIRECTION UP, DOWN
5.0ms - 42.3s(@fs=48kHz),
DECAY
6.0ms - 46.0s(@fs=44.1kHz)
LOW SHEL. F Thru, 21 - 8.0k [Hz]
LOW SHEL. G –12.0 - +12.0 [dB]
PEQ F 100 - 8.0k [Hz]
PEQ G –12.0 - +12.0 [dB]
PEQ Q 10.0 - 0.10
HIGH SHEL. F 50 - 16.0k, Thru [Hz]
HIGH SHEL. G –12.0 - +12.0 [dB]
BALANCE WAT 0 - 100 [%]
[Type: MIX]
Range
Guitar amp simulation type
Distortion type (DST= distortion, OVD= overdrive)
Noise reduction
Distortion drive
Master volume
Speaker cabinet simulation depth
Bass tone control
Middle tone control
High tone control
Parametric equalizer frequency
Parametric equalizer gain
Parametric equalizer bandwidth
Wet/dry balance
[Type: STEREO]
Range
Sensitivity
Filter type
Filter frequency offset
Filter resonance
Output level
Upward or downward frequency change
Filter frequency change decay speed
Wet/dry balance
[Type: STEREO]
Range
Sensitivity
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
High-frequency feedback ratio
Delay time offset
Upward or downward frequency change
Decay speed
Low-range shelving filter frequency
Low-range shelving filter gain
Parametric EQ cutoff frequency
Parametric EQ gain
Parametric EQ Q
High-range shelving filter frequency
High-range shelving filter gain
Wet/dry balance
Effects Parameters
Description
Description
Description
33