Yamaha CS1D Owner's Manual page 66

In either mode, the input connectors of an input unit must be assigned (patched) in the CS1D display to an input chan-
nel in order to be used. Similarly, in order to use the output connectors of an output unit, you must assign them in the
display to an output channel (MIX channel, MATRIX channel, STEREO A/B channel).
The following table shows the type and number of engines required when using the 48 channel model and 96 channel
model in Standard mode or Mirror mode, and the number of input/output connectors and channels that can be used.
Number of inputs/outputs and channel structure
Model
Engine
Input connectors
Output connectors
Monaural input channels
Stereo input channels
MIX channels
MATRIX channels
STEREO channels
Hint
The 96 channel model and 48 channel model differ in the number of available monaural input channels and stereo
input channels. However, they have the same number of MIX channels, MATRIX channels, and STEREO A/B output
channels.
In Mirror mode, one of the engines (A/B) is maintained as a backup, and you can manually switch between the units
to use either one or the other. Thus, the number of input/output connectors and channels is the same as in Standard
mode.
Standard mode
48 channel model 96 channel model
DSP1D 1 DSP1D-EX
Maximum 320 Maximum 320
Maximum 192 Maximum 192
48 96
4 8
48 48
24 24
2 (A, B) 2 (A, B)
Mirror mode
48 channel model 96 channel model
1 DSP1D 2 DSP1D-EX
Maximum 320 Maximum 320
Maximum 192 Maximum 192
48 96
4 8
48 48
24 24
2 (A, B) 2 (A, B)
Chapter 1. Introduction
2
7