Yamaha CS1D Owner's Manual page 492

When using VARI type MIX buses independently
Input Input
channel 1 channel 1
MIX bus 1 MIX bus 2
ON/OFF button PRE/POST button
This is an on/off This button selects either
switch for the sig- PRE or POST (post
nal that is sent fader) as the send point
from the input for the signal that is sent
channel/ST IN from the input channel/
channel to each ST IN channel to each
MIX bus. MIX bus. If PRE is
selected, you can also
use the PRE FADER/
PRE EQ button (next
page, 7) to specify either
pre-fader or pre-EQ.
INPUT CHANNEL 1
FADER
PAN
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
INPUT CHANNEL 2
FADER
PAN
ON
MIX1 (VARI)
LEVEL
LEVEL
MIX2 (VARI)
Input Input
channel 2 channel 2
MIX bus 1 MIX bus 2
LEVEL knob
This adjusts the
send level of the
signal that is sent
to each MIX bus
from the input
channel/ST IN
channel.
......
......
ON
ON
ON
ON
When using VARI type MIX buses in pairs
Input channel 1
MIX buses 1/2
ON/OFF button
PAN knob
This is an on/off switch
This adjusts the posi-
for the signal that is sent
tion of the signal that is
from the input channels/
sent from the input
ST IN channel to the two
channels/ST IN channel
adjacent odd-numbered
to the odd-numbered
even-numbered MIX
MIX bus and even-num-
buses.
bered MIX bus.
LEVEL knob PRE/POST button
This adjusts the send level of This button selects either PRE or
the signal that is sent from POST (post fader) as the send
the input channels/ST IN point for the signal that is sent
channel to the two adjacent from the input channels/ST IN
odd-numbered even-num- channel to the two adjacent odd-
bered MIX buses. numbered
MIX buses. If PRE is selected,
you can also use the PRE
FADER/PRE EQ button (next
page, 7) to specify either pre-
fader or pre-EQ.
INPUT CHANNEL 1
FADER
PAN
ON
MIX1/2 (VARI)
LEVEL
INPUT CHANNEL 2
FADER
PAN
ON
MIX1/2 (VARI)
LEVEL
PAN/ROUTING function
Input channel 2
MIX buses 1/2
even-numbered
......
......
ON
PAN
ON
PAN
157