Basic Operation In The Selected Input Channel Block; Controls And Functions Of The Selected Input Channel Block - Yamaha CS1D Owner's Manual

CS1D Operating Manual (Basic Operation)

Basic operation in the SELECTED INPUT CHANNEL block

Here we will explain how to control an input channel using the SELECTED INPUT CHANNEL block. The SELECTED
INPUT CHANNEL block controls only the currently selected channel. In exchange for being limited to only one chan-
nel, you can manually control virtually all of the mix parameters for the input channel, from head amp settings to EQ/
compressor/gate settings, and sends to the STEREO bus and MIX buses.

Controls and functions of the SELECTED INPUT CHANNEL block

Here we will provide a brief explanation of the controls and functions within the SELECTED INPUT CHANNEL block.
+48/ø/INSERT section
Switch phantom power
on/off (valid only for
channels that are
patched to an LMY2-ML
mic/line input card),
switch the phase, and
turn insertion on/off.
DELAY section
Make settings for the
internal delay function.
MIX SEND section
Make on/off settings
and adjust the send lev-
els for the signals that
are sent from the cur-
rently selected channel
to MIX buses 1–48.
44
INPUT section
Switch between input jacks A/B for channels to which an LMY2-ML mic/line
input card has been patched.
PAIR
PAIR
PAIR
PAIR
PAIR
PAIR
PAIR
PAIR
COMPRESSOR section
Make settings for the
internal compressor.
COMPRESSOR
NOISE GATE section
Make settings for the
internal noise gate.
NOISE GATE
EQUALIZER section
Make settings for the
internal four-band EQ
(HIGH, HIGH MID,
LOW MID, LOW) and
the HPF.