Word Clock - Yamaha CS1D Owner's Manual

WORD CLOCK

[Function]
Although the PM1D system is designed to continue audio processing as far as possible even if there are syn-
chronization-related problems or incorrect settings, word clock synchronization (audio system clock) must
be established for all devices in the system. In this screen you can specify the word clock that will operate the
PM1D system. In general, the frequency of this clock is referred to as the sampling rate or sampling frequency.
Console
In the LCD FUNCTION ACCESS
block, press [SYS/W.CLOCK] (press
repeatedly until the screen shown at
the right appears)
Display
MENU button SYS/W.CLOCK
button WORD CLOCK tab
[Screen functions]
2
1 SETTING LEVEL
Select one of the following two modes for making
word clock settings.
BASIC
This mode simplifies word clock settings for the
PM1D system by limiting the items that can be set.
You can automatically set all word clock settings of
the PM1D to their optimal state simply by selecting
the word clock (the reference word clock) that will be
the master clock. Unless you need to make special
settings, we recommend that you normally use this
level.
1
4 3
SYS/W.CLOCK (system/word clock) function
ADVANCED
This level allows more detailed settings to be made.
If MASTER CLOCK SELECT is other than INT
48k/INT 44.1k/W.CLOCK IN, changing from
ADVANCED to BASIC will forcibly select INT 48k.
2 MASTER CLOCK SELECT
Select the clock source that will be the master clock.
The entire PM1D system will be controlled so that it
operates in synchronization with the selected clock
source. This setting will determine the sampling rate
of the PM1D system.
When the BASIC button is on, the clock source can
be selected from the following devices.
53