Yamaha CS1D Owner's Manual page 350

Control surface digital audio mixing system
Hide thumbs Also See for CS1D:
Table of Contents

Advertisement

Hint
Notch filters 1–4 are independent of the graphic EQ,
and are not affected by the GEQ ON/OFF button.
After recalling a graphic EQ module, you can turn off
the graphic EQ, and use only the notch filters if
desired.
A GEQ LIBRARY (graphic EQ library)
This button accesses the GEQ LIBRARY popup win-
dow, in which you can store/recall the settings of the
GEQ PARAMETER screen (including the notch fil-
ters). ( p.192)
B Level meters
These level meters show the peak levels before and
after the graphic EQ.
C ASSIGN TO DCA FADERS
This button allows the 31 bands of the graphic EQ to
be divided into 12-band groups and assigned to the
DCA faders of the CS1D top panel, so that the faders
can be used to control the boost/cut amount of each
band.
1) 1.60 k–20.0 k button
When you click this button, the 12 bands from
1.6 kHz–20 kHz will be assigned to the DCA fad-
ers.
2) 200–2.50 k button
When you click this button, the 12 bands from
200 Hz–2.5 kHz will be assigned to the DCA fad-
ers.
3) 20-250 button
When you click this button, the 12 bands from
20 Hz–250 Hz will be assigned to the DCA faders.
4) OFF button
When you click this button, assignments to the
DCA faders will be cancelled.
A
B
C
GEQ (graphic EQ) functions
Hint
When you click one of the above buttons 1)–3) in the
GEQ PARAMETER screen, the FADER STATUS
switches in the DCA block of the CS1D will function
as graphic EQ band switches. This state will remain
in effect until you click the OFF button.
When you click the OFF button in the GEQ PARAM-
ETER screen, the FADER STATUS switches will
revert to their normal function, and DCA faders 1–
12 will function as DCA group control faders.
The same result can be produced by pressing the
FADER STATUS [OFF] button of the CS1D.
Using the FADER STATUS switches as band select
switches
IN
1–12
13–24
25–36
37–48
DCA
FADER
STATUS
10
11
12
Hint
While GEQ PARAMETER or the GEQ PARAMETER
popup window are accessed, you can hold down the
panel [SHIFT/GRAB] switch and press a FADER
STATUS switch [1-12]/[13-24]/[25-36] to produce
the same result as clicking on C.
1.60k–20.0k
200–2.50k
20–250
OFF
15

Advertisement

Table of Contents
loading

Table of Contents