Input Unit - Yamaha CS1D Owner's Manual

INPUT UNIT

[Function]
This screen displays the type and operating status of the cards installed in an input unit. In this screen you can
also specify virtual connections of input units and cards, and make Recall Safe settings for a unit.
Console
In the LCD FUNCTION
ACCESS block, press the [SYS/
W.CLOCK] switch (press repeat-
edly until the screen shown at the
right appears)
Display
MENU button SYS/
W.CLOCK button INPUT
UNIT tab
[Screen functions]
1
1 Selected unit
This displays the status of the currently selected
input unit.
The types of I/O card installed in that unit will be
shown by graphics.
When you select a card, the status of that card will be
displayed in the card settings window (6). The
selected card will be displayed with green shading.
The card will be displayed with shading if it is not
installed correctly, or if it is a card that cannot be
controlled.
3
SYS/W.CLOCK (system/word clock) function
2
2 IN1–IN10 buttons
The input unit displayed in 1 can be selected by
number using these buttons. When editing off-line,
you can select DSP1D-EX {DSP1D} INPUT jacks for
virtual connection to input units.
The input unit connected to [INPUT] connector 1 of
the DSP1D-EX will be displayed as "IN1," the input
unit connected to [INPUT] connector 2 as "IN2,"
and so forth.
4
47