Yamaha CS1D Owner's Manual page 312

Control surface digital audio mixing system
Hide thumbs Also See for CS1D:
Table of Contents

Advertisement

OUT DCA/MUTE function MUTE GROUP ASSIGN
screen
Input channels can be assigned to mute groups 1–
12, and output groups can be assigned to mute
groups 9–12.
However, it is not possible to assign both input and
output channels to a mute group 9–12. For this rea-
son if an output channel is already assigned to a
mute group, attempting to assign an input channel
to this mute group will cause a message to be dis-
played, and the assignment will not be made. (The
same will apply for the converse situation.)
When a scene is recalled, the DCA group data of
recall safe channels may be adjusted so that recall
safe settings are consistent within DCA groups 9–12.
Also when a channel library is recalled, the data
recalled to a channel may be adjusted so that set-
tings are consistent within DCA groups 9–12.
2. In the SCENE function DIRECT RECALL screen,
click the MUTE MASTER button.
The SCENE MEMORY block SCENE MEMORY
[MUTE] LED will light.
The SCENE MEMORY [1]–[12] switches will func-
tion as mute master switches that turn muting on/off
for the corresponding mute group.
SCENE function DIRECT RECALL screen
Hint
The function of the SCENE MEMORY [1]–[12]
switches can be selected in the IN DCA/MUTE func-
tion MUTE GROUP ASSIGN screen, and also in the
OUT DCA/MUTE function MUTE GROUP
ASSIGN screen.
3. Press a SCENE MEMORY [1]–[12] switch.
The LED of the corresponding switch will light, and
the mute group assigned to the switch in step 1 will
be muted.
If a previously-on channel is muted by the mute
master switch, the [ON] LED of that channel will
blink.
Hint
You can also turn on multiple buttons to simulta-
neously mute multiple mute groups.
4. To turn muting off, press the SCENE MEMORY
[1]–[12] switches whose LEDs are currently lit.
SCENE MEMORY block
MUTE MASTER
button
95

Advertisement

Table of Contents
loading

Table of Contents