Using The Screen To Set/Defeat Mute Safe - Yamaha CS1D Owner's Manual

Using the screen to set/defeat Mute Safe

You can also set/defeat Mute Safe from within the display. This method is convenient when you wish to quickly make set-
tings for multiple channels.
[Procedure]
1. To set Mute Safe for input channels, press the
INPUT [DCA/MUTE] switch (located in the LCD
FUNCTION ACCESS block) several times to access
the following MUTE GROUP ASSIGN screen (IN
DCA/MUTE function).
LCD FUNCTION ACCESS
block
INPUT [DCA/MUTE] switch
MUTE GROUP ASSIGN screen (IN DCA/MUTE
function)
2. In the MUTE SAFE buttons arranged in the bottom
line of the grid, click the button for the desired
channel.
The button display will change from "–" to "ON,"
and that channel will be set to Mute Safe. With this
setting, the corresponding channel will not be
affected even if mute groups are muted/unmuted.
Chapter 9. Recall safe/Mute safe
3. To set Mute Safe for output channels, press the
OUTPUT [DCA/MUTE] switch (located in the LCD
FUNCTION ACCESS block) to access the following
MUTE GROUP ASSIGN screen (OUT DCA/MUTE
function).
LCD FUNCTION ACCESS
block
OUTPUT [DCA/MUTE] switch
MUTE GROUP ASSIGN screen (OUT DCA/
MUTE function)
4. In the MUTE SAFE buttons arranged in the bottom
line of the grid, click the button for the desired
channel.
The button display will change from "–" to "ON,"
and that channel will be set to Mute Safe.
5. To defeat Mute Safe, access the same screen and
click the MUTE SAFE button once again.
The button display will change back from "ON" to
"–" and Mute Safe will be defeated.
109