Yamaha CS1D Owner's Manual page 386

Control surface digital audio mixing system
Hide thumbs Also See for CS1D:
Table of Contents

Advertisement

Hint
A card with an indication of "VIRTUAL" on a yellow
background is virtually connected.
If a card is indicated as "ILLEGAL" on a red back-
ground, an input card is installed in an output unit
(or vice versa).
3 Card assignment buttons
These buttons are used to assign an I/O card to each
slot of the output unit.
By clicking this button for a slot in which no card has
been installed, you can assign a virtual card.
4 UNIT SELECT
This button is used to virtually connect an output
unit to the jack selected by the OUT 1 – OUT 6 but-
tons.
7 Card settings window
The settings of the selected I/O card are displayed in
this area.
[Procedure]
Making off-line virtual connections for an out-
put unit
By using the included software "PM1D Manager for
Windows," you can make virtual connections for output
units or cards that are not actually connected.
Virtual connections can be made only if a unit/card
is not actually connected.
1. Access the SYS/W.CLOCK function OUTPUT
UNIT screen.
2. Use the OUT1–OUT6 buttons to select the jack to
which the output unit will be virtually connected.
The OUT1–OUT6 buttons correspond respectively
to OUTPUT jacks 1–6 of the DSP1D-EX {DSP1D}.
3. To virtually connect a unit to the currently selected
jack, click the UNIT SELECT button.
5 UNIT LIBRARY
This button accesses the UNIT LIBRARY window, in
which you can store/recall settings for all units. This
is the same function as the UNIT LIBRARY button in
the ST MAS INS/UNIT LIB screen of the OUT
INSERT function.
6 Card type
This shows the type of I/O card installed in each slot
1–8 of the currently selected output unit.
7
UNIT SELECT popup window
The UNIT SELECT popup window will appear, in
which you can select the type of unit. The following
units can be selected in this window.
SYS/W.CLOCK (system/word clock) function
5
6
51

Advertisement

Table of Contents
loading

Table of Contents