Error Message; About The Pm1D System Version Checking Function - Yamaha CS1D Owner's Manual

Error Message

These messages will appear in a popup window in the center of the screen. After reading the message, press
the OK button to close the popup window.
Message
CONTROL LINE [CONSOLE-ENGINE A(B)]
DISCONNECTED!
CONTROL LINE HAS BEEN SWITCHED TO [1(2)] The control line has switched to 1 (2).
[ERROR] Couldn't close file!
[ERROR] Couldn't copy Ini file! [IniFile Save
Error]
[ERROR] Couldn't copy table file! [Destination
File Open Error]
[ERROR] Couldn't copy table file! [Destination
File Write Error]
[ERROR] Couldn't copy table file! [Source File
Open Error]
[ERROR] Couldn't copy table file! [Source File
Read Error]
[ERROR] Couldn't delete file!
[ERROR] Couldn't open file!
[ERROR] Couldn't read file!
[ERROR] Couldn't write file!
[ERROR] File not found!
[ERROR] Illegal file name!
[ERROR] Illegal PM1D File Format!
[ERROR] No card in slot!
[ERROR] No enough space to white!
LOW BATTERY! [CONSOLE] [ENGINE A(B)]
NO BATTERY! [CONSOLE] [ENGINE A(B)]
POWER SUPPLY HAS MALFUNCTIONED!
* Contact your dealer as soon as possible to have the battery replaced/installed. This device will operate correctly even if the battery runs down, but
ultimately, data other than the preset programs will be lost. We recommend that you save your data on an ATA-compliant PC flash storage card
before you have the battery replaced.

About the PM1D system version checking function

When the CS1D starts up, or when the connection status of the various components in the PM1D system has
changed, the software/firmware version of each component is checked to verify that it can function correctly
within the PM1D system.
If a component with a version that has not been guaranteed to work within the PM1D system is found, the
VERSION CHECK popup window will appear, warning you to halt operation or use caution.
If this occurs, please disconnect that component or update its software/firmware to the correct version before
using it. If you continue using the system after this popup window appears, the operation of the entire PM1D
system may become unstable.
For details on how to update the software/firmware of each component, refer to the documentation on the
included PM1D system software disc.
Explanation
The connection between the console and engine A (B) has been
broken.
The file could not be closed correctly.
Failed to write Scene.DAT.
Failed to open the copy-destination file.
Failed to write to the copy-destination.
Failed to open the copy-source file.
Failed to read the copy-source.
Failed to delete the file correctly.
Failed to open the file.
Failed to read the file.
Failed to write the file.
Failed to find the file to be read.
The assigned file name is invalid.
You attempted to load a file that cannot be loaded.
Memory card was not found.
You attempted to save a file that is larger than the free space in
the memory card.
The battery has run down, and should be replaced as soon as
possible.
No battery is installed.
A problem has occurred in the PW1D power supply unit that pro-
vides power to the console.
Error Message
49