In Gate/Comp Function; Gate/Comp Settings For The Input Channel; Gate Prm (Gate Parameters) - Yamaha CS1D Owner's Manual

IN GATE/COMP function

Gate/comp settings for the input channel

GATE PRM (gate parameters)

[Function]
Make gate-related settings for the selected input channel.
Console
In the LCD FUNCTION ACCESS
block, press the INPUT [GATE/
COMP] switch (press repeatedly
until the screen shown at the right
appears)
Display
MENU button INPUT GATE/
COMP button GATE PRM tab
[Screen functions]
1
2
3
1 SEL (channel select)
This button accesses the CH SELECT popup win-
dow, allowing you to select the channel to which
your operations will apply.
2 Level meters
These meters show the amount of gain reduction, the
peak levels before and after the gate, and the peak
level of the key-in signal (the reference signal that
operates the gate). When the signal clips, the corre-
sponding CLIP segment will light.
Hint
If you have selected two paired channels or either
side of a stereo input channel, level meters for both
channels will be displayed.
In the UTILITY function PREFERENCE screen, you
can specify whether the GR meter display will be
linked to the noise gate on/off setting. If linking is
turned on, the GR meter will be displayed only when
the noise gate is on, and will be hidden when the
noise gate is off. If linking is turned off, the GR meter
will always be displayed.
IN GATE/COMP function
139