Yamaha CS1D Owner's Manual page 561

• REV FLANGE
Parameter
TEMPO 20 - 300
Small Hall, Large Hall, Vocal Plate,
REVERB TYPE Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
REV TIME 0.3 - 99 [s]
INI.DELAY 0.0 - 500.0 [ms]
HI.RATIO 0.1 - 1.0
DENSITY 0 - 100 [%]
FREQ. 0.05 - 40.00 [Hz]
NOTE *1
DEPTH 0 - 100 [%]
MOD DELAY 0.0 - 500.0 [ms]
FB.LEVEL –99 - +99 [%]
WAVE Sine, Tri
FLG-REV BAL. 0 - 100 [%]
HPF Thru, 21 - 8.0k [Hz]
LPF 50 - 16.0k, Thru [Hz]
BALANCE WAT 0 - 100 [%]
3 3 3
*1
• FREQ. is calculated from the [TEMPO] and [NOTE].
• REV + SYMPHONIC
Parameter
TEMPO 20 - 300
Small Hall, Large Hall, Vocal Plate,
REVERB TYPE Perc.Plate, Spring, Echo Room,
Strings, Snare, Reverb Flange
REV TIME 0.3 - 99 [s]
INI.DELAY 0.0 - 500.0 [ms]
HI.RATIO 0.1 - 1.0
DENSITY 0 - 100 [%]
FREQ. 0.05 - 40.00 [Hz]
NOTE *1
DEPTH 0 - 100 [%]
MOD DELAY 0.0 - 500.0 [ms]
WAVE Sine, Tri
SYM:REV BAL. 0 - 100 [%]
HPF Thru, 21 - 8.0k [Hz]
LPF 50 - 16.0k, Thru [Hz]
BALANCE WAT 0 - 100 [%]
3 3 3
*1
• FREQ. is calculated from the [TEMPO] and [NOTE].
[Type: MIX]
Range
Tempo (BPM) value that is the basis for calculating the
modulation speed
Reverb type
Reverb time
Initial delay before reverb begins
Reverb time for high-frequency portion
Reverb density
Modulation speed
Used in conjunction with TEMPO to determine modulation
speed
Modulation depth
Delay time applied to modulation
Feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
Modulation waveform
Reverb and flanged reverb balance
(0%= flanged reverb, 100%= reverb)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Wet/dry balance
[Type: MIX]
Range
Tempo (BPM) value that is the basis for calculating the
modulation speed
Reverb type
Reverb time
Initial delay before reverb begins
Reverb time for high-frequency portion
Reverb density
Modulation speed
Used in conjunction with TEMPO to determine modulation
speed
Modulation depth
Delay time applied to modulation
Modulation waveform
Reverb and symphonic balance
(0%= symphonic, 100%= reverb)
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Wet/dry balance
Effects Parameters
Description
Description
29