Yamaha CS1D Owner's Manual page 479

Input functions
C KNEE
This sets the sharpness of the angle at which the out-
put level will change. A setting of HARD produces
the sharpest angle, and a setting of SOFT5 produces
the softest angle.
E
F
D INPUT COMP LIBRARY (Input compressor
library)
This button accesses the COMP LIBRARY window,
where you can store/recall compressor settings
( p.182).
E LINK ON/OFF (key-in link)
This specify whether the key-in signals will link com-
pressor operation for adjacent odd-numbered
even-numbered channels (link=on), or whether the
compressors will operate with independent key-in
signals (link=off).
Key-in signal flow when link=on
LINK = ON
THR
Key-in signal of odd-
numbered channel
THR
Key-in signal of even-
numbered channel
Key-in signal flow when link=off
LINK = OFF
THR
Key-in signal of odd-
numbered channel
THR
Key-in signal of even-
numbered channel
Be careful not to confuse "compressor link" with
"stereo pairing of input channels." Turning on com-
pressor link simply causes the compressors to be
linked by the key-in signal; the compressor parame-
ters themselves can be set independently for each
channel.
When input channels are used as a stereo pair, com-
pressor link will automatically be turned on, and the
compressor parameter values will also be linked.
144
D
ATTACK
Detect the processing
maximum
level ATTACK
processing
Detect the ATTACK
maximum level processing
ATTACK
Detect the
processing
maximum level
However you are free to subsequently turn linking
off and modify the parameter values.
F SELECT (Key-in select)
Select the key-in signal from the following choices.
SELF PRE EQ
Pre-EQ signal of the currently selected input channel
SELF POST EQ
Pre-compressor signal of the currently selected input
channel
LEFT CH
The signal from the previously-numbered input
channel (the same signal as the SELF POST EQ of the
previous channel)
If you select LEFT CH, the post- INPUT FILTER
signal of the previously-numbered channel will be
the key-in signal. However, please be aware that the
INPUT FILTER will not function unless COMP is
on.
KEY IN 1–KEY IN 4
Signal of the input channel selected in the respective
CH SELECT menu
If input channel 1 or the L channel of a ST IN chan-
nel is selected, the LEFT CH button will not be dis-
played.
Nor will it be displayed for paired channels.
GR
GR
GR
GR