Other; Memory Initialization - Yamaha CS1D Owner's Manual

Other

Memory initialization

[Function]
Restore scene memories and other internal data such as libraries to their factory-set condition.
When you initialize the memory, all previously-saved data will be erased, and cannot be recovered. Please use cau-
tion. If memory contains important data, you must save it to a memory card inserted in the PC ATA STORAGE
CARD slot of the CS1D before you initialize the memory.
[Procedure]
1. Turn off the power of the PW1D power supply.
2. Turn on the power of the PW1D, and after the
opening screen appears in the LCD display of the
CS1D, repeatedly press the left/right switches
located below the track pad of the data entry block
until the following screen appears in the display.
3. Use the track pad and the left/right switches to
select either "INITIALIZE ALL MEMORY" or "INI-
TIALIZE CURRENT SCENE."
When you select one of these, the corresponding dis-
play shown below will appear.
"INITIALIZE ALL MEMORY": All memory will be
initialized. All parameters that can be stored in mem-
ory will return to their factory-set condition.
194
"INITIALIZE CURRENT SCENE": The current
state will be initialized. SCENE MEMORY settings or
the various LIBRARY settings that have been stored
will not be initialized.
The following data will be initialized.
CURRENT SCENE
CURRENT UNIT
CURRENT PATCH
CURRENT NAME
CURRENT SETUP
4. Use the left/right switches on the track pad to select
OK.
After initialization occurs, the system will restart.
If you wish to abort the initialization, select CAN-
CEL.