Yamaha CS1D Owner's Manual page 204

LOAD/SAVE screen (UTILITY function)
In the LOAD/SAVE screen you can select the desired
data item, and save or load it.
3. In the screen, click SLOT A or SLOT B to select the
memory card that you wish to use.
4. Use the buttons of the SAVING MEMORY SELECT
section to select the item that you wish to save or
load.
In the SAVING MEMORY SELECT section you can
select the item that you wish to save. The following
items can be selected.
SCENE MEMORY
Contents of one or more scene memories
SETUP
Internal parameters of the PM1D system not
stored in scene memory
TC EVENT
Settings of the TC EVENT screen (MIDI/GPI/TC
function)
MIDI PROGRAM
Settings of the MIDI PROGRAM screen (MIDI/
GPI/TC function)
UNIT LIBRARY
PATCH LIBRARY
NAME LIBRARY
INPUT CH LIBRARY
OUTPUT CH LIBRARY
INPUT EQ LIBRARY
OUTPUT EQ LIBRARY
INPUT GATE LIBRARY
INPUT COMP LIBRARY
OUTPUT COMP LIBRARY
EFFECT LIBRARY
GEQ LIBRARY
Contents of the corresponding library
Chapter 15. Using a memory card to save/load data
5. If you selected Scene Memory in step 4, use the on-
screen From No. knob and To No. knob to specify
the desired number(s). (Alternatively, you can
select "ALL.")
For example if you select Scene Memory in the SAV-
ING MEMORY SELECT section and set the From
No. knob = 01.0 and the To No. knob = 02.9, the data
for PM1D system scene memories 01.0–02.9 will be
saved on the memory card. If at a later time you load
this file from the memory card, the data will be
loaded into the same scene memory numbers of the
PM1D system.
6. Click the SAVE button.
A popup window will appear, in which you can input
the file name and a comment.
7. As necessary, assign a file name and comment, and
click the SAVE button.
The data you selected in steps 4–5 will be saved on
the memory card.
Never insert or remove a memory card while the
card is being accessed.
The following characters cannot be used in a file
name. If you attempt to input them, they will be
ignored. (However, the SPACE character is unavail-
able only at the beginning of the file name.)
(SPACE) \
< > | + =
It is not possible to paste the file name in the FILE
SAVE popup window.
It is not possible to recall or save a scene while sav-
ing. If you press the panel [STORE] switch or
[RECALL] switch, a message of "CANNOT
STORE!" or "CANNOT RECALL!" will appear.
/ : * ? "
[ ] ; , .
145