Yamaha CS1D Owner's Manual page 237

CS1D Reference Manual (Hardware)
[Procedure]
Selecting a channel
The channel to be controlled by the SELECTED INPUT
CHANNEL block can be selected in the following ways.
1. Use a [SEL] switch
You can use the INPUT block INPUT [SEL] switches
or the ST IN block ST IN SEL [L]/[R] switches to
directly select the desired channel.
In the case of a ST IN channel, select either the left or
the right channel.
The [SEL] switch LED of the currently selected chan-
nel will light.
Use an INPUT [SEL] switch of the INPUT block
COMP
[SEL]
switch
SEL GATE
INPUT block
Use a ST IN SEL [L]/[R] switch of the ST IN block
L CLIP
L
ST IN SEL SEL
[L]/[R]
switch
R
SEL
20
+ +
THR THR
- -
COMP
+ +
THR THR
- -
SEL GATE
R L CLIP R
+ +
THR THR
L
- -
COMP SEL COMP
+ +
THR THR
R
- -
GATE SEL GATE
ST IN block
2. Use the SELECTED INPUT CHANNEL block
You can use the CHANNEL SELECT [ /DEC]/[ /
INC] switches of the SELECTED INPUT CHANNEL
block to select channels sequentially.
The number and short name of the channel will be
displayed by the CHANNEL SELECT [NAME] indi-
cator and the CHANNEL SELECT [NUMBER] indi-
cator located above the CHANNEL SELECT [ /
DEC]/[ /INC] switches.
Use the CHANNEL SELECT [ /DEC]/[ /INC]
switches of the SELECTED INPUT CHANNEL
block
CHANNEL
SELECT
[NUMBER]
indicator
CHANNEL
SELECT
[NAME] indi-
cator
CHANNEL SELECT
[ /DEC]/[ /INC]
switches
SELECTED INPUT CHANNEL block
SHIFT
DEC INC