Table of Contents
Advertisement
CS1D Operating Manual (Basic Operation)
6. In the COMPRESSOR section of the SELECTED
INPUT CHANNEL block, turn on the COMPRES-
SOR [ON] switch.
The compressor will be turned on for the corre-
sponding channel.
7. Use the knobs and encoders in the COMPRESSOR
section to adjust parameters such as ATTACK,
RELEASE, THRESHOLD LEVEL, and GAIN.
Hint
For details on the parameters of each type, refer to
"CS1D Reference Manual (Appendices)" ( p.11).
You can also make settings so that the relevant screen
appears when you operate the COMPRESSOR sec-
tion. This setting is made in the UTILITY function
PREFERENCE screen ("CS1D Reference Manual
(Software)"
p.37).
54
Advertisement
Chapters
Table of Contents
