The Dump Out Function; Dumpout Operation - Yamaha VL70-m Owner's Manual

100
The Utility Mode

The Dump Out Function

The Dump Out function allows VL70-m setup and system exclusive data to
be transmitted to a second VL70-m or an external MIDI storage device such
as the Yamaha MDF2 MIDI Data Filer via the MID OUT or TO HOST connec-
tor.
NOTES
• The MIDI Device Number of the receiving device must the same as that set via the VL70-
m PLAY mode "DevNo." parameter (pages 32 and 41).
• You might have to try a few different DumpIntrval parameter (page 99) settings before
the receiving device will receive the data from the VL70-m without errors.

DUMPOUT Operation

When the DUMPOUT sub-mode is selected from the UTILITY mode menu, a
second menu appears which allows you to choose the type of data to be trans-
mitted: SYSTEM, CURRENT, CUSTOM, or INTERNL. From this menu:
1. Select a Data Type
Use the SELECT [<] and [>] buttons to select SYSTEM, CURRENT,
CUSTOM, or INTERNL. The icon to the left of the name of the selected
data type will flash when selected.
SYSTEM All "system" data, including system setup and breath setting
data.
CURRENT Transmits the currently selected voice (i.e. the voice that was
selected immediately prior to engaging the UTILITY mode).
CUSTOM Transmits all 6 CUSTOM bank voices, or a single specified
CUSTOM bank voice. When "ALL" is selected all 6 CUSTOM
voices are transmitted, and when "C1" through "C6" is selected
the corresponding single CUSTOM voice is transmitted.
Transmits all 64 INTERNAL bank voices, or a single specified
INTERNL
INTERNAL bank voice. When "ALL" is selected all 64 INTERNAL
voices are transmitted, and when "I01" through "I64" is selected
the corresponding single INTERNAL voice is transmitted.