Yamaha CS1D Owner's Manual page 488

4 MUTE ON/OFF
These buttons allow operations in the display screen
to turn muting on/off for each mute group.
If the MODE button 1 is set to MUTE MASTER,
these buttons will be linked with the SCENE MEM-
ORY [1]–[12] switches of the console.
Hint
If muting is turned on, the input channels that
belong to that mute group will be in the same state as
if the [ON] switch of the console had been turned
off. They will not sent signals to the buses or output
channels.
At this time, the LED of the [ON] switch of the con-
sole will blink.
5 CLEAR
These buttons clear all input channels that were
assigned to the corresponding mute group.
6
6 MUTE SAFE ON/OFF
This button temporarily defeats muting for a chan-
nel. If this button is displayed as "–", clicking it will
change the display to "ON" and will exclude that
input channel from the mute group. Click it once
again to return to the original state.
Normally, Mute Safe operations can be performed
independently of scene memories. However when a
scene is recalled and a channel changes from monau-
ral to paired, this will be turned On for both paired
channels if either of them had been set to Mute Safe
On.
Mute groups 9–12 can be used for either input chan-
nels or output channels. However it is not possible to
mix input and output channels in the same mute
group. For this reason, input channels cannot be
4 5
IN DCA/MUTE functions
assigned to a mute group 9–12 to which an output
channel has already been assigned.
When a scene is recalled, the mute group data of
Recall Safe channels may be adjusted so that the
recall safe settings are consistent within mute groups
9–12.
Also when a channel library is recalled, the data that
is recalled to the channel may be adjusted so that
mute groups 9–12 are consistent.
153