Display - Yamaha CS1D Owner's Manual

Control surface digital audio mixing system

Hide thumbs Also See for CS1D:

Table of Contents

Display

This screen displays the information needed to operate the PM1D system, and lets you make settings for the

overall system and set MIX parameters for the input and output channels.

By moving the upper part of this frame backward or

forward, you can change the angle of the screen.

Before moving the CS1D, you must be sure to lower the

display toward the back until it is fastened in position.

2 Brightness

This adjusts the brightness of the screen. After setting

the angle of the screen, adjust this for best visibility

from your operating location.

Various parameters are displayed here, depending on

the selected function. For the contents of each screen,

refer to "CS1D Reference manual (Software)."

The LCD screen built into the CS1D has the follow-

ing characteristics. Please be aware that even if the

following symptoms occur, this is not a malfunc-

tion or a defect.

Since the LCD display is manufactured with extremely del-

icate technology, individual pixels may not display cor-

rectly. (A pixel may be constantly lit or constantly dark.)

The LCD screen may be affected by changes in the

ambient temperature.

Depending on the environment of use, you may

notice unevenness in brightness or small spots.

Since the LCD screen uses a cold cathode tube for a

backlight, the state of the display will gradually

change over time.

Table of Contents