Yamaha CS1D Owner's Manual page 518

3 STORE/RECALL buttons
These buttons store/recall input compressor data.
Each button has the following function.
RECALL
Load the currently selected input compressor data
from the library list into the input channel selected
in the COMP PARAMETER screen.
STORE
Store the input compressor data currently selected in
the COMP PARAMETER screen to the number
selected in the library list. When you click this but-
ton, the LIBRARY STORE popup window will
appear, allowing you to assign a name to the input
compressor data.
Input compressor data displayed as "READ ONLY"
in the library list is read-only preset data. New com-
pressor data cannot be overwritten onto these loca-
tions.
TITLE EDIT
This edits the title of the input compressor data cur-
rently selected in the library list.
The TITLE EDIT button is valid only if data has
actually been stored in the number selected in the
library list. If a number with no data is selected, the
button text will be gray, and the button cannot be
used.
APPLY EDIT
Store the edited content of the INPUT COMP
LIBRARY window back into the same library num-
ber.
Hint
The APPLY EDIT button is valid only if the data of
the number selected in the library list has been
edited. If un-edited data is selected, and if a number
marked "READ ONLY" is selected, the button text
will be gray, and the button cannot be used.
4 EDIT
If you edit the input compressor data selected in the
library list (2), this area will indicate "EDIT."
5 EXIT
This button exits the INPUT COMP LIBRARY win-
dow and returns to the previous screen.
Key-in settings are not stored in the library.
INPUT COMP LIBRARY
183