Yamaha CS1D Owner's Manual page 151

CS1D Operating Manual (Basic Operation)
Number of the input
channel
Name of the input channel
2. Click the grid at which the input channel intersects
with the output jack that you wish to use as the
direct output.
3. In the LCD FUNCTION ACCESS block, press the
INPUT [PATCH] switch several times to access the
following INSERT/DIRECT OUT screen (IN
PATCH function).
In the INSERT/DIRECT OUT screen (IN PATCH
function) you can switch insertion on/off for each
input channel. Here you can also select the insert I/O
point (the position at which the external device is
inserted), and the direct out point (the position from
which direct output is taken).
Number of the input channel
Short name of the input
channel
4. Use the on-screen buttons to select one of the fol-
lowing as the direct out point (the location in the
signal patch from which the direct out signal will
be taken).
PRE EQ ...............Immediately before the EQ
PRE FADER........Immediately before the fader
POST FADER .....Immediately after the fader
POST ON............Immediately after the [ON]
switch
92
To patch the direct out point of a channel to the desired
output jack, click this grid to display a " " symbol.
Number of output jacks that are
patched to the direct out point of
that channel
Turn insert on/ Specify the insert I/O point for
off for each each channel.
channel.
From the top, this shows the
type and number of the output
unit, the slot number of the
card, and the channel number
of the output jack.
INSERT/DIRECT OUT screen (IN PATCH func-
tion)
Specify the direct out point for
each channel
Hint
The direct point can also be selected in the IN
PATCH function INSERT/DIRECT POINT screen,
or in the INSERT/DIRECT VIEW screen.