Yamaha CS1D Owner's Manual page 275

CS1D Reference Manual (Hardware)
2. Using the SELECTED OUTPUT CHANNEL block
You can use the CHANNEL SELECT [ST]/
[MATRIX]/[MIX] switches of the SELECTED OUT-
PUT CHANNEL block to select the desired channel
group (STEREO A/B, MATRIX, MIX), and then use
the CHANNEL SELECT [ /DEC]/[ /INC]
switches to step through the channels consecutively.
These switches will operate as follows.
CHANNEL SELECT [ST] switch
The channel that was last selected for STEREO will
be selected.
CHANNEL SELECT [MATRIX] switch
The channel that was last selected for MATRIX will
be selected.
CHANNEL SELECT [MIX] switch
The channel that was last selected for MIX will be
selected.
CHANNEL SELECT [ /INC] switch
The number following the currently selected chan-
nel will be selected.
If the highest-numbered channel is selected, you
will move to the first channel in the same group.
CHANNEL SELECT [ /DEC] switch
The number preceding the currently selected chan-
nel will be selected.
If the first-numbered channel is selected, you will
move to the last channel in the same group.
The [ST]/[MATRIX]/[MIX] switch LEDs will indi-
cate the group of the currently selected channel.
The CHANNEL SELECT [NAME] indicator and
CHANNEL SELECT [NUMBER] indicator located
at the right of the switch will indicate the channel
number and short name of the currently selected
channel.
[ST]/[MATRIX]/[MIX]
[ /DEC] switch
switches
ST
MATRIX
CHANNEL
COPY
MIX
CHANNEL SELECT
SELECTED OUTPUT CHANNEL
SELECTED OUTPUT CHANNEL block
58
[ /INC] switch
SHIFT
DEC INC