Setting And Changing The Administrator Password - Xerox DocuColor 2240 User Manual

Setting and Changing the Administrator Password

This section explains how to set and change the System Settings
Mode password. The default password is set to "11111". You
cannot enter System Settings Mode unless the password is
entered. Setting a password also allows you to output total reports
and a list of registered mailboxes.
1
Press the Access button. The Password Entry screen is
displayed.
2
Enter the password using the numeric keypad on the Control
Panel, and select Confirm. The System Administrator Menu
screen is displayed.
NOTE: Your password will be displayed by an asterisk (*). If you
make a mistake, press Clear (C) and re-enter the password.
To cancel the operation, select Cancel.
3
Select System Settings. The System Settings screen is
displayed.
U G ( M
S E R U I D E A C H I N E
A )
D M I N I S T R A T O R
4 – 3