Certification; Certifier Password - Labconco Logic Vue User Manual

Certification

Prior to use, a qualified certifier should certify the enclosure. Under normal operating
conditions, the enclosure should be recertified at least annually and when relocated or
serviced. The certifier should perform the following tests:
• Downflow Velocity Profile Test
• Inflow Volume Test
• Airflow Patterns
• HEPA Filter Leak Test
• Work Area Cleanliness Test *
• Lighting Intensity Test *
• Noise Level Test *
*These tests are optional and may be omitted at the
user's or certifier's discretion.
If you have any questions regarding certification agencies or help locating one, contact
Labconco's Product Service Department at (800) 821-5525 or +1 816-333-8811.

Certifier Password

The certifier password is:
Use this password for all normal calibration and certification activities.
If installing or replacing an Airflow Sensor, the sensor will need a zero point calibration.
In order to access the zero-point calibration screen, a different password is required.
This password is: [LIGHT] [UP] [TIMER] [DOWN]
[LIGHT] [UP] [TIMER] [TIMER]
49
[OK/MUTE].
[OK/MUTE].