Labconco Logic Vue User Manual page 149

After installation is complete, the Logic Vue must be configured to operate with an
Airflow Sensor. See
Sensor functionality within the software. After configuration, the Airflow Sensor must be
calibrated. See Section 8: Calibration
the configuration and calibration steps are provided below for convenience.
1. From the Main Menu, press [MENU], using
icon. Press [OK/MUTE].
2. Use [UP] or [DOWN]
3. From the Warning
the following screens are restricted.
4. On the Password
[OK/MUTE].
Section 7: Configuration
of the User's Manual. A condensed version of
[MENU]
to select the
Password
[OK/MUTE]
Screen, press [OK/MUTE]
Screen, enter the password:
of the User's Manual to enable the Airflow
[UP] or [DOWN]
Password icon, press [OK/MUTE].
WARNING !
RESTRICTED AREA
to acknowledge the warning that
[LIGHT] [UP] [TIMER] [DOWN]
149
select the Tools
Tools
FOR TECHNICIAN
USE ONLY