Configuring Event Logging; System Log Configuration - SMC Networks 6824MPE INT Management Manual

CLI – Enter Line Configuration mode for a virtual terminal, then specify
the connection parameters as required. To display the current virtual
terminal settings, use the show line command from the Normal Exec
level.
Console(config)#line vty
Console(config-line)#login local
Console(config-line)#password 0 secret
Console(config-line)#timeout login response 300
Console(config-line)#exec-timeout 0
Console(config-line)#password-thresh 3
Console(config-line)#end
Console#show line
Console configuration:
Password threshold:
Interactive timeout: Disabled
Login timeout: Disabled
Silent time:
Baudrate:
Databits:
Parity:
Stopbits:
VTY configuration:
Password threshold:
Interactive timeout: 600 sec
Login timeout: 300 sec
Console#

Configuring Event Logging

The switch allows you to control the logging of error messages, including
the type of events that are recorded in switch memory, logging to a remote
System Log (syslog) server, and displays a list of recent event messages.

System Log Configuration

The system allows you to enable or disable event logging, and specify
which levels are logged to RAM or flash memory.
Severe error messages that are logged to flash memory are permanently
stored in the switch to assist in troubleshooting network problems. Up to
4096 log entries can be stored in the flash memory, with the oldest entries
being overwritten first when the available log memory (256 kilobytes) has
been exceeded.
5 times
60
auto
8
none
1
3 times
B C
ASIC ONFIGURATION
4-15
4-16
4-17
4-18
4-19
4-20
4-26
3-33