Vlan 802.1Q Frame Type - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

vlan 802.1q frame type

Configures a port to accept all frames or accept only VLAN-tagged frames.
vlan 802.1q slot/port frame type {all | tagged}
Syntax Definitions
slot
port
all
tagged
Defaults
parameter
all | tagged
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E, 9000E
Usage Guidelines
If you configure a port to accept only VLAN-tagged frames, then any frames received on this port that do
not carry a VLAN ID (i.e., untagged frames or priority-tagged frames) will be discarded by the ingress
rules for this port. Frames that are not discarded by this ingress rule are classified and processed according
to the ingress rules for this port.
Examples
-> vlan 802.1q 3/1 frame type all
Release History
Release 6.1; command was introduced.
page 6-4
The slot number to configure 802.1Q tagging.
The port number to configure 802.1Q tagging.
Configures this port to accept all frames.
Configures this port to accept only VLAN-tagged frames.
default
all
802.1Q Commands
OmniSwitch CLI Reference Guide June 2012