Ethernet Port Commands
show interfaces hybrid ifg
Displays interface inter-frame gap values for combo ports.
show interfaces [slot | slot/port[-port2]] hybrid {fiber |copper} ifg
Syntax Definitions
slot
slot/port[-port2]
fiber
copper
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
•
Enter a slot number to display information for all interfaces on a specific port.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or a range of interfaces.
Examples
-> show interfaces hybrid fiber ifg
Slot/Port
ifg(Bytes)
-----------+-------------
1/45
1/46
1/47
1/48
2/45
2/46
2/47
2/48
output definitions
Slot/Port
ifg
OmniSwitch CLI Reference Guide
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Specifies that statistics for the SFP port(s) will be displayed.
Specifies that statistics for the copper 10/100/1000 RJ-45 port(s) will be
displayed.
12
12
12
12
12
12
12
12
Interface slot and port numbers.
Inter-frame gap value (Gigabit Ethernet interface).
June 2012
page 1-127